Table of Contents
Advertisement
Menus and submenus
284
i
The multifunction display shows the unit
in the additional speedometer inverse to
the speedometer unit in the instrument
cluster.
To change the setting: press a again.
X
Light submenu
Setting the daytime running lamps
i
This function is not available in Canada.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Running Lights
If the
Daytime Running Lights
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in orange.
Press the a button to save the setting.
X
Further information on daytime running
lamps (
page 130).
Y
Setting the brightness of the ambient
lighting
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Ambient Brightness
You will see the selected setting.
Press a to confirm.
X
Press the : or 9 button to adjust the
X
brightness to any level from
(bright).
Press the a or % button to save the
X
setting.
Sett.
menu.
Daytime
function.
function
Settings
menu.
function.
Off
to
Level 5
Setting the ambient lighting color
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Amb. Light Col.
Press a to confirm.
X
Press the : or 9 button to set the
X
color to SOLAR,
NEUTRAL
Press the a or % button to save the
X
setting.
Surround lighting and exterior lighting
delayed switch-off
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Lights
submenu.
Press a to confirm.
X
Using : or 9, select the
X
Lighting
function.
When the
Surround Lighting
activated, the light cone and the area
around the vehicle are displayed in orange
in the multifunction display.
Press the a button to save the setting.
X
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
Before leaving the vehicle, turn the Smart-
X
Key to position 0 in the ignition lock.
Turn the SmartKey to position 2 in the igni-
X
tion lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the
engine.
If you have activated the
ing
function and you turn the light switch to
Ã, the following functions are activated
when it is dark:
Settings
menu.
function.
or POLAR.
Settings
menu.
Surround
function is
Surround light‐
Advertisement
Chapters
Table of Contents
