Camera Menu - Olympus Stylus 780 Instruction Manual

[e SHOOT & SELECT1]/[f SHOOT & SELECT2]
• These scene modes allow you to take sequential pictures by holding down the shutter
button. After shooting the pictures, select the ones you want to erase by marking them with
a R and press S to erase them.
e e
BACK
MENU

CAMERA MENU

4
WB
................................................................................................. Adjusting the color of a picture
AUTO
5
3
1
w
x
y
ISO
......................................................................................................Changing the ISO sensitivity
AUTO
HIGH ISO AUTO
80/100/200/400/
800/1600
• When [DRIVE] is set to [W], [ISO] is fixed at [AUTO].
22
EN
Selected picture.
Press 43 to scroll through the pictures.
S
OK GO
Pictures with a R mark are erased.
Press e to mark the pictures to be erased.
The white balance is adjusted automatically for natural color,
regardless of the light source.
Sunny day For shooting under a clear sky.
Cloudy day For shooting under a cloudy sky.
Tungsten light For shooting under tungsten lighting.
Fluorescent For shooting under daylight fluorescent lighting. (This type of lamp is
lamp 1 mainly used in homes.)
Fluorescent For shooting under a neutral white fluorescent lamp. (This type of
lamp 2 lamp is mainly used in desk lamps.)
Fluorescent For shooting under a white fluorescent lamp. (This type of lamp is
lamp 3 mainly used in offices.)
Sensitivity is automatically adjusted according to the conditions of the
subject.
This function uses higher sensitivity compared to [AUTO] to minimize blur
caused by a moving subject or by camera movement.
A low value lowers the sensitivity for daylight shooting of clear, sharp
pictures. The higher the value, the better the camera's light sensitivity and
ability to shoot with a fast shutter speed and in low light conditions.
However, high sensitivity introduces noise into the resulting picture, which
may give it a grainy appearance.