Olympus Stylus 725 SW Advanced Manual page 36

Operating, shutting off and checking the alarm
• Operating the alarm:
Turn off the camera. The alarm only operates when the camera is off.
• Shutting off the alarm:
While the alarm is sounding, press any button to shut off the alarm and turn off
the camera. Note that pressing the o button, K/h/s button or q
button will turn the camera on. (Pressing the K/h/s button and q
button will turn the camera on only when [K/q] is set to [YES].)
When [SNOOZE] is set to [ON] at this time, the setting will be canceled. When
[SNOOZE] is [OFF], the alarm stops automatically and the camera turns off
2
after 1 minute of no operation.
VIDEO OUT
NTSC / PAL
The factory default settings differ according to the region where the camera
is sold.
To play back camera images on a TV, set the video output according to your TV's
video signal type.
• TV video signal types by country/region Check the video signal type before
connecting the camera to the TV.
NTSC: North America, Taiwan, Korea, Japan
PAL: European countries, China
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Multi-connector
Settings on the camera
Press the q button to turn on the
camera.
• The last picture taken is displayed
on the TV. Use the arrow pad (43)
to select the picture you want to
display.
36
...........................................................Playing back pictures on a TV
AV cable (provided)
Connector cover
Connect to the TV's video
input (yellow) and audio
input (white) terminals.
Settings on the TV
Turn the TV on, and set it to video
input mode.
• For details of switching to video
input, refer to your TV's instruction
manual.