Adjusting Loudspeaker Volume - Philips SKM7488NC User Manual

DECT2_Book.qxd 03-06-2005
> The LINK lights (A-2, B-7) on both units blink green until
connection has been established.This will take up to
approximately 30 seconds. Both LINK lights (A-2, B-7) will
then light green continously.
> If, after 30 seconds, no link is establshed both LINK lights
(A-2, B-7) will light up red and the parent unit will emit a
beep from time to time.
4 Position the baby unit at least 1 meter / 3 feet away from
your baby.
5 Position the parent unit at the desired place within the
operating range of the baby unit but at least 1 meter / 3 feet
away from the baby unit. For more information on the
operating range see 'Technical specifications'.
You can now monitor your baby!

Adjusting loudspeaker volume

• Briefly press the volume + and – buttons (A-4) on the baby
unit repeatedly until the desired loudspeaker volume for the
baby unit has been reached.
• Briefly press the volume + and – buttons (B-9) on the parent
unit repeatedly until the desired loudspeaker volume for the
parent unit has been reached.
Note: If you press the Volume + and – buttons (A-4, B-9) too
long, the volume will not be adjusted.
14:44 Pagina 9
Using your baby monitor
> 1m / 3 ft
Other features
EN
9