Adjusting Loudspeaker Volume - Philips AVENT SCD525 User Manual

• The display goes on and the battery symbol
appears on the display (Fig. 14).
• The LINK light flashes red and the message
'Searching' appears on the display. (Fig. 15)
• The LINK light on the parent unit
turns green and lights up continuously when
a connection has been established between
the baby unit and parent unit. The message
'Linked' appears on the display. (Fig. 16)
• After 2 seconds the message 'Linked'
disappears and the temperature value is
shown on the display. (Fig. 17)
If no connection is established, the LINK
•
light on the parent unit flashes red. The
parent unit beeps from time to time and
the message 'Searching' appears on the
display, followed by the message 'Not
Linked' (Fig. 18).
5.1 Positioning the baby
monitor
Place the baby unit at least 1 metre/3.5 feet
1
away from your baby (Fig. 19).
Place the parent unit within the operating
2
range of the baby unit. Make sure it is at least
1 metre/3.5 feet away from the baby unit to
avoid acoustic feedback (Fig. 10).
For more information on the operating range,
see section 'Operating range' below.
5.1.1 Operating range
The operating range of the baby monitor is 330
metres/1000 feet in open air. Depending on the
surroundings and other disturbing factors, this
range may be smaller. Indoors the operating range
is up to 50 metres/150 feet.
Note:
D
If the ECO mode is switched on, the operating
range of the baby monitor is also smaller. See
section 'ECO mode' in chapter 'Menu options'.
All manuals and user guides at all-guides.com
Dry materials
Wood, plaster, cardboard,
glass (without metal,
wires or lead)
Brick, plywood
Reinforced concrete
Metal grilles or bars
Metal or aluminium
sheets
For wet and moist materials, the range loss may
be up to 100%.
6 Features
The following features are described in chapter
'Menu options', as they can only be operated in
the menu of the parent unit:
•
•
•
•
•
•
6.1 Adjusting loudspeaker
1
Material
thickness
< 30cm/12in 0-10%
< 30cm/12in 5-35%
< 30cm/12in 30-100%
< 1cm /0.4in 90-100%
< 1cm/0.4in 100%
Adjusting microphone sensitivity
Sound alert on/off
Setting room temperature range (minimum
and maximum temperature)
Temperature alert on/off
ECO mode on/off
Setting temperature scale (Fahrenheit or
Celcius)
volume
Press the volume + or – button on the baby
unit until the desired loudspeaker volume for
the baby unit has been reached (Fig. 20).
Note:
D
You can only set the loudspeaker volume on
the baby unit when a lullaby is playing.
Loss of
range
9