Troubleshooting - AEG L 98690 FL User Manual

30 www.aeg.com/au

TROUBLESHOOTING

The machine does not start or it stops
during operation.
Try to find a solution to the problem be-
fore you contact the service centre (refer
to the table).
With some problems, the acoustic sig-
nals operate and the display shows an
alarm message.
Problem
The display tells
to check the tap:
the appliance
does not fill with
water.
The display tells
to check the
drain filter: the
appliance does
not drain the wa-
ter.
The display tells
to check the
door.
The display tells
there is a water
alert.
Possible cause
The water tap is closed.
The water inlet hose is
damaged.
The filters in the water in-
let hose are blocked .
The connection of the
water inlet hose is not
correct.
The water pressure is too
low.
The water tap is blocked
or is furred with lime-
scale.
The water drain hose is
damaged.
The filter of the drain
pump is blocked.
The connection of the
water drain hose is not
correct.
The appliance door is
open or not closed cor-
rectly.
The anti-flood device is
activated.
WARNING!
Deactivate the appliance before
you do the checks.
Possible solution
Open the water tap.
Make sure that the water inlet
hose has no damages.
Clean the filters. Refer to 'Care
and cleaning'.
Make sure that the connection is
correct.
Contact your local water authori-
ty.
Clean the water tap.
Make sure that the water drain
hose has no damages.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
Make sure that the connection is
correct.
Close the door correctly.
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.