Mounting The Bar And Chain - Stihl 015 Instruction Manual / Owners Manual

'Mounting the Bar and Chain
Removing the chain sprocket
cove~
The guide bar and Oi,lomatic chain are supplied separately.
To mount them, first unscrew the collar nut (1) and take off
the chain sprocket cover (2). On Quickstop models the
chain brake must be released before the sprocket cover is
removed, i. e. pUll hand guard (3) towards handlebar. Take
off and discard cardboard spacer washer.
Now move nut (4) of chain tensioner back as far as the stop
by turning the tensioning screw (5) counterclockwise.
'locate slot of gUide bar over the stud bolt (6) so that the
peg of the tensioning nut (4) engages in the lower fixing
hole (7).
Starting at the chain sprocket, place the Oilomatic chain on
the guide bar so that the cutting' edges on the top of the bar
are facing the bar nose (8). Push chain sprocket cover (2)
onto stud bolt (6), screw on collar nut (1) finger tight.
Top: Backing off the tensioning nut
Center: Locating the guide bar
Bollom: Fitting the Oilomatic chain -
culling edges face the bar nose
21