Limbing - Stihl 015 Instruction Manual / Owners Manual

27
30
28
29
(ill. 27). Next, align the saw in the direction in which the
recess is to be cut.
With the saw at full throttle, insert the guide bar in the
trunk (ill. 28).
Enlarge the plunge cut as shown in illustration (ill. 29).
arnlng!
There is an extreme danger of kickback at this point.
Extra caution must be taken to maintain control of the saw.
To make the felling cut, follow the sectioning method
described previously (ill. 30).
If you are inexperienced with a chain saw plunge-cutting
should not be attempted. Seek the
~Ip
of a professional.
Limbing
Limbing is removing the branches from a fallen tree.
Warnlngl
There is an extreme danger of kickback during the limbing
operation. Do not work with the nose of the bar. Be extre-
mely cautious and avoid contacting the log or other limbs
with the nose of the guide bar.
Do not stand on a log while limbing it - you may slip or the
log may roll.
17