Automatic Descaling; Eliminating The Descaling Message - Saeco ROYAL OFFICE SUP 015V Operation And Maintenance

English
Warning
Never use vinegar to avoid damaging the machine!
Two descaling procedures are available:
-

AUTOMATIC DESCALING;

- STANDARD DESCALING.
Automatic descaling
Select this option from the settings menu (see page 14).
Press the keys to position the asterisk on the Descaling
option and select it by pressing E (Ent).
The display reads:
Pour the descaling agent in the water tank (ref. 9 - Fig. 1)
following instructions on the product packaging. Place a
container of sufficient capacity under the hot water dis-
pensing pipe (ref. 7 - Fig. 1) and press the HOT WATER
key. Automatic descaling begins, the pump injects small
quantities of decalcifier into the system and stops to give it
time to work.
During this phase, the display reads:
After about 45 minutes, when descaling is over, the dis-
play reads:
Press E (Ent). The pump stops. A message appears to sig-
nal that the machine must now be cleaned to eliminate
decalcifier residue.
Remove the water tank (ref. 9 - Fig. 1), rinse it with care
and fill with fresh water. Press E (Ent) to empty the tank
completely. The display reads:
Go back to the settings function by pressing E (Ent).
Note: Descaling can be exited by pressing C (Esc).
"DESCALING "
"MACHINE IS "
"DESCALING "
"DESCALING "
"FINISHED "
"RINSE MACHINE "
"FILL WATERTANK "
"RINSING "
"FINISHED "

Eliminating the descaling message

Press the keys to position the asterisk on the Descal. Warn-
ing option from the settings menu and select it by pressing
E (Ent).
The display reads:
To modify this value YES or NO press the standard keys.
When this resetting is performed, all internal water counters
are reset and the DESCALING message disappears.
If now the following function is selected
the DESCALING message does not appear on the display,
replaced by the following message:
"RESET DESCALING "
"NO "
"SIGNAL DESCAL. "
"QUANTITY WATER "
"NOT REACHED "