Handling And Storage; Handling; Storage; Safety - Saeco ROYAL OFFICE SUP 015V Operation And Maintenance

English
3 - HANDLING AND

STORAGE

Handling

During handling and transport, the machine must be kept
in the upright position according to the instructions on the
packaging.
Lift and position with care.
Do not shake the machine.
Storage
The machine must be stored according to the following
temperatures:
-- minimum temperature:
- maximum temperature:
- maximum humidity:
The machine packaging consists of cardboard and ex-
panded polystyrene.
Warning
Given the overall packaging weight, do not pile up more
than three machines.
The machine must be stored in its original packaging away
from humidity and dust.

4 - SAFETY

4.1

General safety norms

Danger
It is extremely dangerous to put electrical parts in contact
with water! Do not direct the steam or hot water jet toward
body parts; handle the hot water pipe with care: danger of
burns!
Use the machine for its intended use only.
Do not apply technical modifications to the machine: it can
be extremely dangerous!
Warning
The machine must be used only by adults and by those
familiar with it.
Do not allow children to play with the machine. Children
are not aware of the danger of electrical devices.
Power supply
Do not touch electrical parts to avoid serious injuries. Plug
the machine in the correct socket. Voltage must correspond
to that indicated on the plate inside the machine (Fig. 2).
4°C.
40°C
95%
Power cord
If damaged, the power cord must be replaced by an Ap-
proved Assistance Centre. Do not connect the cord near
corners and sharp or very hot objects. Avoid contact with
oil. Do not stretch the cord when moving the machine. Do
not unplug the machine by pulling the cord or touch it with
wet hands. The cord must not hang from tables and shelves.
Location
Place the machine on a stable surface that cannot be
knocked down. Water could pour out: danger of burns!
Do not use the appliance outdoors or in low temperature
environments. Do not place the machine on a very hot sur-
face or near open flames to avoid damage to the machine
casing.
Danger of burns
Keep hands away from the hot water and coffee jet.
Positioning
For the correct functioning of the machine follow the indi-
cations below:
- select an even surface
- select a location that is sufficiently well-lit, clean and
near an easily reachable power source.
- the minimum distance between the wall and the ma-
chine must be in line with the indications outlined in
figure 3.
100 mm.
Fig. 3