Olympus FE-100 Advanced Manual page 33

1
Press .
• The flash settings screen is displayed.
g"How to use the direct buttons"
(P. 11)
2
Select the flash mode, and press
i.
• You can also set by pressing
repeatedly.
3
Press the shutter button halfway.
• In conditions where the flash will fire, #
lights (flash stand-by).
4
Press the shutter button fully to
take the picture.
TIPS
When the # (flash charge) indication blinks
→ The flash is charging. Wait until the # indication stops blinking and remains
lit.
Note
• During panorama shooting, the flash is not available.
• The flash may not give you the optimum result in macro mode. Check the
resulting picture on the monitor.
Flash shooting
# mark
2560 2560 2560 1920 1920 1920
33
3