Playback Functions; Single-Frame/Close-Up Playback - Olympus E-520 Instruction Manual

8

Playback functions

Single-frame/Close-up playback

The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting. g"REC VIEW" (P. 99)
1
Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn on
the camera again.
2
Use p to select images you want to view. You can
also turn the dial to switch to U for close-up
playback.
G
(Single-frame playback)
L N
N
a : Displays the frame that is
stored 10 frames back
c : Displays the frame that is
stored 10 frames ahead
d : Displays the next frame
b : Displays the previous frame
Press the < button
• Plays back the image at a
10× magnified close-up
position.
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
U
(Close-up playback)
Press the INFO button
(Close-up position playback)
Press the INFO button
(Close-up frame-by-frame playback)
q button
j
< button
INFO button
p
Press p to change the
close-up position.
Press p to move the
display of the close-up
position.
When [g FACE DETECT]
(gP. 39) is set to [ON],
a frame is displayed
around a detected face.
Press i to move the
frame to another face.
Press bd to view frame-
by-frame close-ups.
When [g FACE DETECT]
is set to [ON], press ac
to move to another face in
close-up position.
• Press the INFO button
15 15 15
to return to close-up
playback.
8
79
EN