Sequential Shooting - Olympus E-520 Instruction Manual

Sequential shooting

Single-frame shooting o Shoots 1 frame at a time when the shutter button is pressed
Sequential shooting j
• Press the shutter button fully and keep it pressed. The camera will take pictures in
sequence until you release the button.
• Focus, exposure, and white balance are locked at the first frame (during S-AF, MF).
x
Notes
• During sequential shooting, if the battery check blinks due to low battery, the camera stops
shooting and starts saving the pictures you have taken on the card. The camera may not save
all of the pictures depending on how much battery power remains.
Setting method
Direct button
Super control panel
Setting display
• You can check the settings in the viewfinder while using
the j/Y/< button to make the settings.
Single-frame shooting/
Sequential shooting
:
Single-frame shooting
:
Sequential shooting
• Anti-shock display (gP. 60):
The D symbol displayed next to the icon on the super control panel indicates that anti-shock
is activated.
(normal shooting mode).
Shoots at 3.5 frames/sec. for as long as the shutter button is
pressed (during JPEG).
j/Y/< j
i p: [j/Y/<]
Self-timer Remote control
:
12-second self-timer
:
2-second self-timer
j/Y/< button
:
0 second
:
2 seconds
SELECT
j
i button
GO
5
57
EN