Motorola SBG940 Quick Installation Manual page 8

8 SBG940 Wireless Cable Modem Gateway
C. USB Connection
You can connect one PC running Windows 98, Windows Me, Windows 2000,
or Windows XP to the SBG940 USB port. The USB connection requires special
driver software supplied on the SBG940 Installation CD-ROM.
1
Insert the SBG940 Installation CD-ROM into the CD-ROM drive. Be sure
the SBG940 is not connected to your PC.
2
Install the USB driver software and restart your PC.
3
Connect the USB cable to the USB connector on the SBG940 and connect
its other end to the USB connector on the PC. Continue with Section E to
secure your Internet connection.
If you experience problems with the USB connection, uninstall the USB driver
following the instructions in the SBG940 User Guide.