Encrypting The Disk - Lexmark W840 User Manual

Encrypting the disk

Warning:
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
5
Press
Contents will be lost. Continue? appears.
6
Press
The Encrypting Disk progress bar appears.
7
When disk encryption has finished, click
8
Press
To disable disk encryption:
1
Turn the printer off.
2
Press and hold
3
Release both buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the display.
4
Press
5
Press
Contents will be lost. Continue? appears.
6
Press
The Encrypting Disk progress bar appears.
7
When disk encryption has finished, click
8
Press
Downloaded From ManualsPrinter.com Manuals
All resources on the hard disk will be deleted. (Resources residing in flash memory or in RAM remain
unaffected.)
Note: This setting is only available when a hard disk is installed.
and while turning the printer on.
until Disk Encryption appears, and then press
until Enable appears, and then press
until Yes appears, and then press
until Exit Config Menu appears, and then press
and while turning the printer on.
until Disk Encryption appears, and then press
until Disable appears, and then press
until Yes appears, and then press
until Exit Config Menu appears, and then press
Administrative support
.
.
.
.
.
.
Encrypting the disk
107
.
.
.
.