Cleaning The Shaving Unit - Philips RQ1100 series User Manual

22_002_5349_2_DFU-Luxury_A6_v2.indd 21

Cleaning the shaving unit

Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
1 Switch off the shaver. Remove it from the
charger or remove it from the Jet Clean
System (specific types only).
2 Rinse the shaving unit under a hot tap for some
time.
Note: You can also clean the shaving unit with the
cleaning brush supplied.
3 Pull the shaving head holder off the bottom
part of the shaving unit and rinse it under a hot
tap for 30 seconds.
Note: You can also clean the shaving head holder with
the cleaning brush supplied.
4 Carefully shake off excess water and let the
shaving head holder dry.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
5 Reattach the shaving head holder to the
bottom part of the shaving unit ('click').
Cleaning the shaving unit in the Jet Clean
System (specific types only)
The Jet Clean System has an automatic cleaning
program. When you press the on/off button, the
Jet Clean System starts cleaning in this automatic
cleaning program.
Preparing the Jet Clean system for use
Fill the cleaning chamber before first use.
English
21
2-7-2012 12:50:07