Cleaning The Shaving Unit Under The Tap; Cleaning The Shaving Unit With The Cleaning Brush - Philips PT923 Manual

english
34

Cleaning the shaving unit under the tap

Switch off the shaver and disconnect it from the mains.
1
Press the release button to open the shaving unit.
2
Rinse the shaving unit and hair chamber under a hot tap
3
for 30 seconds.
Be careful with hot water. Always check if the water is not
too hot, to prevent your hands from getting burnt.
- Rinse the hair chamber and the inside of the shaving unit.
- Rinse the outside of the shaving unit.
Close the shaving unit and shake off excess water.
4
Be careful not to hit the shaving unit against anything while
shaking off excess water.
Never dry the shaving unit and the hair chamber with a
towel or tissue, as this may damage the shaving heads and
the coupling spindles.
Open the shaving unit again and leave it open to let the
5
shaver dry completely.

Cleaning the shaving unit with the cleaning brush

Switch off the shaver and disconnect it from the mains.
1
Press the release button to open the shaving unit.
2