Philips RQ1100 series User Manual page 18

English
18
22_002_5349_2_DFU-Luxury_A6_v2.indd 18
1 Make sure the shaver is switched off.
2 Pull the shaving unit straight off the shaver.
Note: Do not twist the shaving unit while you pull it off
the shaver.
3 Insert the lug of the Beard Styler
attachment into the slot in the top of the
shaver (1). Then press down the Beard Styler
attachment (2) to attach it to the shaver
('click').
Using the Beard styler attachment with
comb
You can use the Beard Styler attachment with the
comb attached to style your beard at one fixed
setting, but also at different length settings. The
hair length settings on the Beard Styler attachment
correspond to the remaining hair length after cutting
and range from 1 to 5mm.
1 Slide the comb straight into the guiding
grooves on both sides of the Beard Styler
attachment ('click').
2 Press the length selector (1) and then push it
to the left or right (2) to select the desired
hair length setting.
3 Press the on/off button on the shaver to switch
it on.
2-7-2012 12:50:01