Philips RQ1100 series User Manual page 23

22_002_5349_2_DFU-Luxury_A6_v2.indd 23
3 Press the on/off button on the Jet Clean
System to start the cleaning program.
, The shaver display stops showing the charging
indication.
, The cleaning light starts to flash and the shaver is
automatically lowered into the cleaning fluid.
, The cleaning light flashes throughout the
cleaning program, which takes a few minutes.
, During the first phase of the cleaning program,
the shaver automatically switches on and off
several times and moves up and down.
, During the second phase of the cleaning
program, the shaver is placed in the drying
position, indicated by the flashing drying symbol.
This phase takes approx. 2 hours. The shaver
stays in this position until the end of the
program.
, After the cleaning program, the charging
indication appears on the shaver display (see
chapter 'The display').
Note: If you press the on/off button of the Jet
Clean System during the cleaning program, the
program aborts. In this case, the cleaning or drying
light stops flashing and the holder moves to the
highest position.
Note: If you remove the adapter from the wall socket
during the cleaning program, the program aborts. The
holder remains in its current position. When you put
the adapter back into the wall socket, the holder moves
to the highest position.
English
23
2-7-2012 12:50:10