Cleaning The Shaving Unit In The Jet Clean System (Specific Types Only) - Philips RQ1265CC Manual

C C F F
DFU_RQ1295CC他3機種_EN_CS2_A6.indd 52
1 Rinse the shaving unit under a hot tap for some
time.
2 Pull open the three shaving heads one by one.
3 Rinse all three shaving heads and all three hair
chambers under a hot tap for 30 seconds.
Note: You can also brush the shaving heads and hair
chambers with the cleaning brush supplied.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
4 Carefully shake off excess water and leave the
shaving heads open to let the shaving unit dry
completely.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
Cleaning the shaving unit in the Jet Clean
System (specific types only)
The Jet Clean System comes in two types:
52
English
12.4.19 7:42:56 PM