Internal Connectors - Asus P5SD1-FM2 User Manual

1 . 7 . 2
1 .
2 .
ASUS
This Manual: http://www.manuallib.com/file/2595652

Internal connectors

Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other
end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection
when using an FDD cable with a covered Pin 5.
P5SD1-FM2 Floppy disk drive connector
Power LED connector (3-1 pin PLED)
This 3-1 pin connector is for the system power LED. Connect the
3-pin power LED cable from the system chassis to this connector. The
LED lights up when you turn on the system power, and blinks when
the system is in sleep mode.
P5SD1-FM2 PLED connector
P5SD1-FM2
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
PLED
1
1 - 2 7