Asus Ez Flash Utility - Asus P5SD1-FM2 User Manual

2 . 1 . 2
The ASUS EZ Flash feature allows you to update the BIOS without having to
go through the long process of booting from a floppy disk and using a
DOS-based utility. The EZ Flash utility is built into the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
To update the BIOS using EZ Flash:
1 .
2 .
3 .
4 .
ASUS
This Manual: http://www.manuallib.com/file/2595652

ASUS EZ Flash utility

Visit the system builder's website to download the latest BIOS file for
the motherboard and rename the same to P5SD1FMF.ROM.
Save the BIOS file to a floppy disk, then restart the system.
Press <Alt> + <F2> during POST to display the following.
EZFlash starting BIOS update
Checking for floppy...
Insert the floppy disk that contains the BIOS file to the floppy disk
drive. When the correct BIOS file is found, EZ Flash performs the BIOS
update process and automatically reboots the system when done.
EZFlash starting BIOS update
Checking for floppy...
Floppy found!
Reading file "P5SD1FMF.ROM". Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
• Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
• A "Floppy not found!" error message appears if there is no floppy
disk in the drive. A "P5SD1FMF.ROM not found!" error message
appears if the correct BIOS file is not found in the floppy disk. Make
sure that you rename the BIOS file to P5SD1FMF.ROM.
P5SD1-FM2 2-3