Olympus CAMEDIA C-40ZOOM Reference Manual page 186

Troubleshooting (Cont.)
POSSIBLE CAUSES
No picture is taken when the shutter button is pressed.
5 There is a problem with
the card.
6 The card is full.
7 The batteries ran out of
power.
8 The control panel/
monitor indications
disappear, or only the
battery check blinks.
9 A write-protect
adhesive seal is placed
on the card or there is
no card in the camera.
The date recorded with the image data is wrong.
1 The date is not set.
2 The camera has been
left for approx. 1 hour
with the batteries
removed and the date
setting is canceled.
186
CORRECTIVE ACTION
5 See the error code chart.
6 Replace the card or delete
unwanted pictures, etc.
7 Replace the batteries with
new ones.
8 Replace the batteries with
new ones. (Do not open the
battery compartment cover
when the card access lamp
is blinking.)
9 Insert a new card in the
camera.
1 Set the date. The clock
adjustment is not factory-
preset.
2 Set the date again.
REF. PAGE
P. 193
P. 29, 134,
135
P. 25
P. 25
P. 29
P. 33
P. 33