Olympus CAMEDIA C-40ZOOM Reference Manual page 180

Disconnecting the USB cable (Cont.)
Windows 2000/Me
Do either of the following to remove the USB cable:
1
Left-click on the "Unplug or Eject Hardware" icon (circled in the illustration
below) on the task bar (at the lower right-hand side of your computer
screen).
2
When a message appears saying that the drive has been stopped, left-
click on the message.
3
When a message appears saying that the hardware can be ejected safely,
click on the "OK" button.
4
Remove the USB cable.
1
Double-click on the "Unplug or Eject Hardware" icon (circled in the
illustration below) on the task bar (displayed at the bottom right on a
personal computer).
2
When the display for ejecting the hardware appears, select the camera
from the hardware device list, then click on the "Stop" button.
3
When a message appears saying that the hardware can be ejected safely,
click on the "OK" button.
4
Remove the USB cable.
● If the window returns the following message when attempting to disconnect
the camera, close all applications and try again.
180
(A) Click
(B) Double-click
on the task bar.
on the task bar.