Page 1 REFERENCE MANUAL Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference.
Page 2 For customers in USA Declaration of Conformity Model Number : C-4040ZOOM Trade Name : OLYMPUS Responsible Party : Olympus America Inc. Address : 2 Corporate Center Drive, Melville, New York 11747-3157 U.S.A. Telephone Number : 631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules.
Page 3: Major Features
Major features Stores your pictures on SmartMedia (card). ENLARGE SIZE setting Lets you make clear, good- quality prints in larger sizes such as A3 (11" x 14"), etc. Exposure modes to suit various applications. P: Program auto A: Aperture priority S: Shutter priority M: Manual mode Take sequential shots!
Page 4: Table Of Contents
C o n t e n t s Name of parts ...10 Camera 10 Viewfinder indications 12 Control panel indications 13 Monitor indications — Shooting information 15 Monitor indications — Playback information 19 Still picture playback information 19 Movie playback information 20 How to use this manual ...21 Getting started Attaching the strap ...24...
Page 5 C o n t e n t s Using the menus What are the menus? ...43 Menu basics ...43 Top menu ...44 MODE MENU...45 Using tabs ...46 Selecting, setting, and saving functions ...47 Example of how to set a function ...48 MODE MENU functions (shooting) ...49 MODE MENU functions (playback)...53 Shortcut menu...54...
Page 6 C o n t e n t s Recording movies Zoom — Telephoto/Wide-angle shooting ...79 Digital zoom 79 Flash shooting ...81 Auto-flash 81 Red-eye reduction flash Fill-in flash Flash off Slow Synchronization SLOW1 SLOW2 Using the Slow Synchronization flash 83 Using the flash 84 Flash intensity control 86 Advanced shooting...
Page 7 C o n t e n t s Adjusting image quality and exposure Record mode ...103 Selecting record modes 103 ENLARGE SIZE 106 ISO sensitivity ...107 Exposure compensation ...108 White balance ...109 AUTO (auto white balance) 109 PRESET (preset white balance) 109 (One-Touch white balance) 109 White balance adjustment 111 Sharpness...112...
Page 8 C o n t e n t s Erasing pictures ...130 Single-frame erase 130 All-frame erase 131 Formatting cards ...132 Playback on a TV ...133 Picture rotation 134 Useful functions Custom button...136 Setting the custom button 137 Using the custom button 137 Shortcut ...139 Setting the shortcut menu 140 Using the shortcut menu 141...
Page 9 C o n t e n t s Transferring pictures to a computer Connecting directly to a computer by cable ...161 How to connect 162 Installing a USB driver when using Windows 98/98SE 164 Transferring images to a computer — Downloading...166 Removing the card 170 Removing the USB cable 172 Saving directly from a card ...173...
Page 10: Name Of Parts
Camera Zoom lever (T/W) (P. 79) Index display/Close-up playback lever ( (P. 125, 126) Shutter button (P. 64) Flash (P. 84) Lens 5-pin external flash socket ( ) (P. 176) ● Unscrew to remove the cover before connecting the bracket cable. Diopter adjustment dial (P.
Page 11 Camera (Cont.) Macro/Spot button ( Print button ( ) (P. 153) Erase button ( Flash mode button ( ) (P. 84) Viewfinder (P. 12) Arrow pad (ÑñÉí) Monitor (P. 15–20, 74) OK/Menu button (P. 43) Manual focus button ) (P. 70) AE lock button (P.
Page 12: Viewfinder Indications
Viewfinder indications Orange lamp (P. 72, 84) ● In some situations, this lamp lights up when you press the shutter button halfway. This indicates that the flash will then fire when the picture is taken. ● Blinks if the flash is required and the flash is turned off. ●...
Page 13: Control Panel Indications
Control panel indications Flash mode (P. 81– 83) ● Displayed when the flash mode is selected by pressing the mode) button. No indication: Auto-flash, SLOW: Slow synchronization flash, Manual Focus (P. 70, 71) ● Displayed when locking focus using the Manual focus function. Flash intensity control (P.
Page 14 Control panel indications (Cont.) Exposure compensation (P. 108) ● Displayed when exposure compensation is set to any value except 0. Auto-bracket (P. 90) ● Displayed when the drive mode is set to the Auto-bracket mode. Macro mode (P. 96) ● Displayed when the macro mode is engaged. Spot metering mode (P.
Page 15: Monitor Indications - Shooting Information
Monitor indications — Shooting information The indications vary depending on the shooting mode. The information below is always displayed in the shooting mode. Shooting mode (P. 59, 60) ● Displays the shooting mode. P: Program mode, A: Aperture priority mode, S: Shutter priority mode, M: Manual mode, Aperture value (P.
Page 16 Monitor indications — Shooting information (Cont.) Number of storable still pictures (P. 75) ● Displays the number of still pictures you can shoot. Seconds remaining ( ● Displays available movie recording time. Manual Focus (P. 70) ● Displayed when locking focus using the Manual focus function. Memory gauge (P.
Page 17 Monitor indications — Shooting information (Cont.) Drive mode (P. 88) ● Displayed when the drive mode is set on the menus. : Single-frame shooting, Sequential shooting, Auto-bracket White balance (P. 110) ● Displayed when WB is set on the menus. No indication: AUTO, : Fluorescent, ISO (P.
Page 18 Monitor indications — Shooting information (Cont.) Flash mode (P. 84) ● Displayed when the flash mode is selected by pressing the mode) button. No indication: Auto-flash, SLOW1/ SLOW2/ (flash override) Spot metering/Macro mode (P. 91, 96) ● Displayed when the Spot metering/Macro mode is selected by pressing (Macro/Spot) button.
Page 19: Monitor Indications - Playback Information
Monitor indications — Playback information INFO setting on the Menu allows you to select how much information to display (P. 124). Still picture playback information ’01.12.23. 21:56 6453 When INFO is set to OFF Battery check ● The battery check indication changes as follows: Fully Low power...
Page 20: Movie Playback Information
Monitor indications — Playback information (Cont.) Movie playback information 6453 When INFO is set to OFF Battery check (P. 19) Movie mark (P. 116) Sound record ● Displayed when sound is recorded. Protect (P. 129) ● Displayed when the picture is protected.
Page 21: How To Use This Manual
How to use this manual The instructions in this manual use a series of numbers for each operating procedure and button/dial illustration. Follow these numbers in order when operating the camera. Set the mode dial to the position shown in the illustration. In this example, you would set P.
Page 22 How to use this manual (Cont.) Before using this function, set the mode dial to the position shown. Focusing (Cont.) FULLTIME AF — A reliable time-saving way to focus FULLTIME AF keeps the image on the monitor in focus at all times, without having to press the shutter button halfway.
Page 23: Getting Started
Chapter Getting started Before using the camera, you should follow the steps outlined in this chapter.
Page 24: Attaching The Strap
● Attach the strap correctly as shown so that the camera does not fall off. If the strap is attached incorrectly and the camera falls off, Olympus is not responsible for any damages. Loosen the strap in the stopper beforehand to adjust the strap length.
Page 25: Loading The Batteries
Loading the batteries This camera uses 2 CR-V3 lithium battery packs or 4 AA (R6) NiMH batteries, NiCd batteries, alkaline batteries or lithium batteries. Important: ● CR-V3 lithium battery packs cannot be charged. ● Do not peel the label on a CR-V3 lithium battery pack. If an insulating sheet covers the terminals, peel it off ONLY from the terminals.
Page 26: Battery Check
Loading the batteries (Cont.) Battery check When remaining battery power is low, the battery check indication on the control panel changes as follows: Lights. Remaining power Remaining power level: level: high low. Replace with a new battery. ● After taking a picture or when turning on the power with batteries that are running low, the camera may emit several short beeps and the number of storable pictures will blink.
Page 27 Loading the batteries (Cont.) Service life of CR-V3 lithium battery packs 1 Number of pictures 2 Display time Shooting conditions • Repeat the same function in sequential 2fps shooting conditions for no more than 10 minutes then take a break •...
Page 28: Card Basics
● Market-available 3 V (3.3 V) cards (4 MB – 128 MB; all cards except 2MB) ● 2 MB cards cannot be used. ● This camera may not recognize a non-Olympus card (such as 3 V (3.3 V)) or a card that was formatted on another device (such as PC, etc.). Before use, be sure to format the card on this camera (P.
Page 29: Inserting/Ejecting The Card
Card basics (Cont.) Inserting/ejecting the card Make sure the camera is turned off (i.e. the mode dial is set to OFF). Inserting the card Insert the card fully with the contact area facing towards the monitor side. Insert until you feel it locked into place. ●...
Page 30: Power On/Off
Power on/off Press the tabs on the lens cap to remove it. Set the mode dial to P, A/S/M, ● The camera turns on. ● The lens moves out when the mode dial is not set to Set the mode dial to OFF. ●...
Page 31: Card Check
Power on/off (Cont.) Card check When the power is turned on, the camera checks the card automatically. Control panel Card error mark Monitor There is no card in the camera or the card is not locked into place. T Insert the card until it There is a problem with the card.
Page 32: Date/Time Setting
Date/time setting It is possible to set the date/time of the built-in clock. Since the date/time is saved with recorded pictures, be sure to set it correctly. Set the mode dial to any position except OFF. ● Be sure to remove the lens cap beforehand since the lens automatically extrudes when the mode dial is set to any position...
Page 33 Date/time setting (Cont.) When is selected in green on Ññ the screen, press the date format. ● Select any one of the following formats: DMY (Day/Month/Year) MDY (Month/Day/Year) YMD (Year/Month/Day) ● This step and the following steps show the procedure used when the date and time settings are set to Y-M-D.
Page 34 Date/time setting (Cont.) Press ● The camera returns to the menu screen. ● If is pressed again, the menu will disappear and the screen will enter the shooting mode. ● For a more accurate setting, don't press until the clock hits 00 seconds.
Page 35: Adjusting The Diopter
Adjusting the diopter Adjusting the diopter Turn the Diopter adjustment dial to see the AF target mark clearly. Viewfinder AF target mark Holding the camera Hold the camera firmly with both hands while keeping your elbows at your sides to prevent the camera from moving. Keep your fingers and the strap away from the lens and flash.
Page 36: Quick-Start Guide
Chapter Quick-start guide Explains the simplest shooting and playback methods. This Quick-start guide has been designed for those who want to become familiar with the camera in a very short time. Before using the camera, be sure to follow the steps explained in chapter 1.
Page 37: Taking Still Pictures
Taking still pictures Remove the lens cap and set the mode dial to P. Point the camera towards a subject while viewing through the viewfinder. Card access lamp To focus on the subject, press the shutter button halfway, slowly and gently. ●...
Page 38: Recording Movies
Recording movies Viewfinder Green lamp Point the camera towards the subject and compose the picture while viewing through the monitor. Press the shutter button halfway. ● The green lamp on the viewfinder lights up. Press the shutter button all the way to start recording.
Page 39: Viewing Still Pictures - Using Quick View
Viewing still pictures — Using Quick View Press the (monitor) button twice quickly. ● The monitor turns on and recorded appears. To return to the shooting mode, press the shutter button halfway. ● The monitor turns off. Shoot pictures using the viewfinder. ●...
Page 40: Playing Back Movies - Using Quick View
Playing back movies — Using Quick View Display the movie frame (picture with T See steps 1 and 2 on page 39. Press to display menu. Press to start Playback. ● When playback finishes, the screen returns to the beginning of the movie.
Page 41: Erasing Pictures
Erasing pictures Display the picture you want to erase. T See steps 1 and 2 on page 39. Press the (erase) button. ERASE SELECT When the ERASE screen Ñ appears, press to select YES. ● To cancel erasure, press ñ on the arrow pad to select NO, and press or the...
Page 42: Using The Menus
Chapter Using the Menus This chapter explains what the camera's menus are and how they work. Some functions on this camera are only available by using the menus.
Page 43: What Are The Menus
What Are the Menus? When you turn on the camera and press the (OK/Menu) button, what appears on the monitor is generally called "the menu". The menus can be operated using many functions on this camera use the menus, understanding them will help you enjoy shooting more.
Page 44: Top Menu
Top Menu When displaying menus, the first screen that appears on the monitor is called the top menu. The contents of this menu change depending on the mode dial position (see the diagram below). On the top menu, two types of menus are available: MODE MENU (P.
Page 45: Mode Menu
MODE MENU To enter MODE MENU, press functions that can be used at any given time, available functions depend on the mode dial position. MODE MENU functions are divided into 4 tabs (CAMERA, PICTURE, CARD, SETUP). See "Using Tabs" on the next page. P top menu DRIVE MODE MENU...
Page 46: Using Tabs
Using Tabs When MODE MENU is selected, a screen appears with 4 tabs on the left. Ññ to select a tab. P top menu DRIVE MODE MENU CAM: CAMERA Functions for shooting: selecting drive modes, using digital zoom, etc. PIC: PICTURE Functions for adjusting images: selecting record modes, adjusting white balance, etc.
Page 47: Selecting, Setting, And Saving Functions
Selecting, Setting, and Saving Functions After choosing a tab, you can select and set its functions. Pressing tab displays the functions contained in it. Select the desired function using Ññ í and press CAMERA tab DRIVE AUTO A/S/M FLASH PICTURE tab AUTO AUTO BLUE...
Page 48: Example Of How To Set A Function
Example of How to Set a Function Follow the steps below to set one function in MODE MENU. In this example, you will set (beep sound) to OFF when the mode dial is set to P. Set the mode dial to P and press to display the top menu.
Page 49: Mode Menu Functions (Shooting)
MODE MENU Functions (Shooting) ~P. 88, 89, 142, 180 DRIVE Changes the drive modes, or sets autobracketing or remote/self timer shooting. ~P. 107 Selects ISO sensitivity (based on normal camera film) from AUTO/100/200/400. ~P. 61– 63 A/S/M Selects the exposure mode from A (Aperture priority auto), S (Shutter priority auto), or M (Manual mode).
Page 50 Allows approx. 4 seconds of sound recording to be attached to a picture. PANORAMA Allows panorama pictures to be taken with Olympus CAMEDIA- brand SmartMedia cards. To connect pictures into a single panoramic image, CAMEDIA Master software is required. FUNCTION Lets you shoot pictures in black &...
Page 51 MODE MENU Functions (Shooting) (Cont.) ~P. 103 Sets the record mode. ~P. 109 Sets the appropriate white balance according to the light source. ~P. 111 Lets you make fine changes to the white balance manually. SHARPNESS Adjusts the sharpness of images. CONTRAST Adjusts the contrast of images.
Page 52 MODE MENU Functions (Shooting) (Cont.) ALL RESET Selects whether to keep the current camera settings when you turn off the power. ~P. 146 Sets the beep sound (used for warnings. etc.) to OFF/LOW/HIGH. REC VIEW Selects whether to display images on the monitor while saving them to a card.
Page 53: Mode Menu Functions (Playback)
MODE MENU Functions (Playback) ~P. 128 Adds sound to recorded still pictures. CARD SETUP Formats cards (FORMAT), or erases all images in the card (ALL ERASE). ALL RESET Selects whether to keep the current camera settings when you turn off the power. ~P.
Page 54: Shortcut Menu
Shortcut Menu Shortcut menus are the menus other than MODE MENU on the top menu. Although most shortcut menus are also contained in MODE MENU, putting them on the top menu allows instant access to them. The shortcut menus can be replaced only when the mode dial is set to P or A/S/M.
Page 55: Mode Dial & Shortcut Menus
Mode Dial & Shortcut Menus The diagram below describes the shortcut menus that are available with each mode dial position. The shortcut menus are the menus other than MODE MENU on the top menu. These shortcut menus can be replaced with other functions by using “Shortcut”...
Page 56: Mode Dial & Factory Default Settings
Mode Dial & Factory Default Settings Mode dial Function DRIVE When BKT is selected: A/S/M FLASH SLOW NOISE REDUCTION MULTI METERING DIGITAL ZOOM FULLTIME AF AF MODE (still pictures) (movies) FUNCTION (For other record modes, settings are as follows.) TIFF: 2272x1704 SHQ: 2272x1704 SQ1: 1280x960/NORMAL SQ2: 640x480/NORMAL...
Page 57 Mode Dial & Factory Default Settings (Cont.) Mode dial Function SHARPNESS CONTRAST CARD SETUP ALL RESET REC VIEW FILE NAME m/ft SHORT CUT CUSTOM BUTTON INFO A/S/M – RESET YMD/2001/1/1 A: DRIVE C: WB AE LOCK – – – – –...
Page 58: Shooting Basics
Chapter Shooting basics This chapter explains the basics of taking good pictures with your camera. You should read it through in order to make the most of the information provided. Before using the camera, also be sure to read "How to use this manual" and "Getting started", chapter 1.
Page 59: Shooting Mode Setting - Mode Dial
Shooting mode setting — Mode dial Set the mode dial to P, A/S/M or ● The camera turns on. Since the lens automatically extrudes when the camera is turned on, take off the lens cap first. ● When the camera mode is set to A/S/M or monitor turns on automatically.
Page 60 Shooting mode setting — Mode dial (Cont.) S (Shutter priority shooting) Allows you to set the shutter speed manually. The camera sets the aperture automatically. Set the shutter speed according to the subject and the type of picture you want. Shutter speed setting T P.
Page 61: Aperture Setting - Aperture Priority Shooting
Shooting mode setting Shooting mode setting — Mode dial (Cont.) — Mode dial (Cont.) Aperture setting — Aperture priority shooting In the top menu, select MODE MENU T CAMERA T A/S/M T A. To increase the aperture value (F Ñ value), press If the aperture value is displayed in red The aperture you have set is unsuitable for the conditions.
Page 62: Shutter Speed Setting - Shutter Priority Shooting
Shooting mode setting — Mode dial (Cont.) Shutter speed setting — Shutter priority shooting In the top menu, select MODE MENU T CAMERA T A/S/M T S. To set the shutter speed faster, press Ñ If the shutter speed is shown in red The shutter speed you have set is unsuitable for the conditions.
Page 63: Aperture & Shutter Speed Setting - Manual Shooting
Shooting mode setting Shooting mode setting — Mode dial (Cont.) — Mode dial (Cont.) Aperture & Shutter speed setting — Manual shooting In the top menu, select MODE MENU T CAMERA T A/S/M T M. To set the shutter speed faster, press To increase the aperture value (F value), press É...
Page 64: How To Use The Shutter Button
How to use the shutter button Point the camera towards the subject. Place the AF target mark on the subject while viewing through the viewfinder. Press the shutter button gently (halfway). ● When the focus and brightness (exposure) are locked, the green lamp next to the viewfinder lights.
Page 65: Focusing
Focusing Focusing Auto focus When you place the AF target mark on a subject and press the shutter button halfway, the green lamp lights up. This means that focusing is being performed automatically. If the green lamp blinks, focusing is not correct. If this happens, use the AF mode (P.
Page 66: When Auto Focus Does Not Work - Subjects That Are Difficult To Focus On
Focusing (Cont.) When Auto focus does not work — Subjects that are difficult to focus on Under certain types of conditions auto focus may not work properly. If you run into problems, try the procedure below or switch to Manual focus (P. 70). Conditions Auto focus may not work properly.
Page 67: Focus Lock - Focusing On Subjects That Are Not In The Center Of The Frame
Focusing (Cont.) Focusing (Cont.) Focus lock — Focusing on subjects that are not in the center of the frame If the subject of your composition is not within the AF target mark and focusing is not possible (as illustrated to the right), try the following: Focus on something within the AF target mark.
Page 68: Af Mode - Changing The Focus Range
Focusing (Cont.) AF MODE — Changing the focus range Allows you to select the focus range of your subject. iESP : Focus selection is based on the entire picture on the screen. Even when the subject is not in the center of the screen, focusing is possible.
Page 69: Fulltime Af - A Reliable Time-Saving Way To Focus
Focusing (Cont.) FULLTIME AF — A reliable time-saving way to focus FULLTIME AF keeps the image on the monitor in focus at all times, without having to press the shutter button halfway. This function reduces focusing time. When OFF is selected, images cannot be focused unless the shutter button is pressed halfway.
Page 70: Manual Focus
Focusing (Cont.) Manual focus If Auto focus is unable to lock, use manual focus. Hold down for more than 1 second. When the focus distance selection screen appears on the monitor, press í to select MF. Ññ Press to select the focus distance. ●...
Page 71 Focusing (Cont.) To return to the AF mode, press select AF, then press ● How to shoot while keeping the same focus distance at all times T The MF can be locked at the same length as when you perform focus lock.
Page 72: Taking Still Pictures
Taking still pictures Taking still pictures while using the viewfinder The camera actually records a wider area than the picture you composed while viewing through the viewfinder. Point the camera towards a subject while viewing through the viewfinder. Place the subject on the AF target mark.
Page 73 Taking still pictures ● How to zoom in on a subject or shoot a wider picture (zoom-out) T To zoom in on a subject, press the zoom lever towards T. To shoot a wider picture, press the zoom lever towards W (P.
Page 74: Taking Still Pictures While Using The Monitor
Taking still pictures ● Press the shutter button gently using the ball of your finger. If it is pressed hard, the camera may move and pictures may come out blurred. ● Recorded pictures will be saved in the card regardless of whether the camera is turned off or the batteries are replaced or removed.
Page 75 Taking still pictures Press the (monitor) button to turn on the monitor. ● In the A/S/M mode, the monitor turns on automatically. Point the camera towards a subject while viewing through the monitor. Place the subject on the AF target mark. Press the shutter button halfway.
Page 76 Taking still pictures If you take pictures continuously, the indication changes as shown below. The memory gauge lets you know if another shot is possible. Before shooting/ One picture No picture taken taken ● The monitor does not turn on. T If the camera is not used for over 30 seconds, the monitor turns off.
Page 77: Recording Movies
Recording movies Point the camera towards a subject while viewing through the monitor. Place the subject on the AF target mark. Press the shutter button halfway. ● When focus and exposure (brightness) are locked, the green lamp lights. Press the shutter button all the way. ●...
Page 78 Recording movies Press the shutter button all the way to stop recording. ● The card access lamp blinks and the camera begins storing the movie on the card. You cannot record another movie as long as the card access lamp is blinking.
Page 79: Zoom — Telephoto/Wide-Angle Shooting
Recording movies ● Since focus is locked during movie recording, the subject may go out of focus if the distance to the subject varies considerably. To avoid this, set to OFF (P. 101) to automatically maintain correct focus. ● In the mode, the factory default setting of locked at the maximum wide-angle and you can only use the digital zoom.
Page 80 Zoom — Telephoto/Wide-angle shooting (Cont.) Press the zoom lever towards T. ● The monitor turns on. ● If the monitor is turned off, the picture returns to 1x. Zoom area Indicates digital zoom Indicates optical zoom Digital zoom ON Mode dial & Digital zoom Mode dial A/S/M *In the...
Page 81: Flash Shooting
Flash shooting Select a flash mode appropriate to the lightning conditions and the effect you want to achieve. You can also adjust the amount of light emitted using the flash intensity control (P. 86). See page 176 – 179 for how to use an external flash. The flash modes are as follows: Auto-flash Automatically fires in low-light and backlight conditions.
Page 82: Flash Off
Flash shooting (Cont.) Flash off The flash does not fire even in low-light conditions. Use this mode in situations where flash photography is not desired or is prohibited, or when you want to shoot a natural-looking twilight or night scene. ●...
Page 83: Using The Slow Synchronization Flash
Flash shooting (Cont.) SLOW2: 2nd curtain (rear curtain) In contrast to 1st curtain, 2nd curtain fires the flash just before the shutter closes. Changing the flash timing can create interesting effects in your picture, such as expressing the movement of a car by showing the taillights streaming backwards.
Page 84: Using The Flash
Flash shooting (Cont.) Using the flash Press the (flash mode) button repeatedly until the desired flash mode indication appears. ● The flash mode changes as follows: Auto-flash (no indication) Slow synchronization flash Press the shutter button halfway. ● Before the flash fires, the orange lamp blinks.
Page 85 Flash shooting (Cont.) ● If the flash dose not fire T Flash does not fire in the following situations: When shooting a bright subject, in the movie record mode, during Sequential shooting (P. 88), when FUNCTION is set to WHITE BOARD/BLACK BOARD (P. 97), during Panoramic shooting (P.
Page 86: Flash Intensity Control
Flash shooting (Cont.) Flash intensity control You can adjust the amount of light emitted by the flash. In some situations, you may get better results by adjusting light emission. Examples include small subjects, distant backgrounds, and when increasing contrast. In the top menu, select MODE MENU T CAMERA T Ñ...
Page 87: Advanced Shooting
Chapter Advanced shooting Advanced shooting methods such as metering modes and special effects let you take more creative pictures.
Page 88: Sequential Shooting
Sequential shooting There are 3 Sequential shooting modes: Sequential shooting Sequential shooting Sequential shooting modes can be selected from the DRIVE mode menu. Drive mode Single-frame shooting button is pressed all the way. (normal shooting) Sequential shooting T P. 88 AF Sequential shooting shooting T P.
Page 89: Auto Bracketing — Shooting Pictures Sequentially With A Different Exposure For Each Frame
Sequential shooting (Cont.) Auto bracketing — Shooting pictures sequentially with a different exposure for each frame Under some conditions, you may obtain better results shooting with exposure compensation than by using the exposure setting considered optimal by the camera. When Auto bracket is set, exposure is changed automatically for each frame when you start shooting.
Page 90 Sequential shooting (Cont.) Take pictures. ● Press the shutter button all the way and keep it pressed to shoot the preset number of pictures. You can stop shooting at any time by releasing the shutter button. Mode dial & Drive mode Mode dial A/S/M (M: BKT is not available)
Page 91: Metering Modes — Metering The Subject Brightness
Metering modes — Metering the subject brightness There are 3 metering methods: Digital ESP metering, spot metering and multi-metering. Digital ESP metering T Meters the center of the subject and the area around it. Multi-metering T P. 92 Spot metering — Selecting the metering area Exposure is determined by metering within the AF target mark.
Page 92: Multi-Metering — Metering The Exposure Of More Than One Point In The Frame
Metering modes — Metering the subject brightness (Cont.) Multi-metering — Metering the exposure of more than one point in the frame Meters the brightness of the subject at up to 8 different points to set the optimal exposure based on the average brightness. Useful with high-contrast subjects.
Page 93 Metering modes — Metering the subject brightness (Cont.) e.g. : When metering 2 points (pressing The average values for the aperture and shutter speed as calculated by metering 2 points. These values are recalculated every time another metering point is added. indicates the average for the 2 metering points.
Page 94: Ae Lock — Locking The Exposure
Metering modes — Metering the subject brightness (Cont.) AE lock — Locking the exposure Suitable for situations when optimal exposure is difficult to achieve (such as excessive contrast between the subject and the surroundings). For example, if the sun is in the frame and shooting with automatic exposure results in a dark subject, re-compose your shot so that the sun is not in the frame.
Page 95 Metering modes — Metering the subject brightness (Cont.) Place the subject you want to focus on within the AF target mark, then press the Shutter button halfway. ● The green lamp lights. During AE lock, AEL is displayed. AE lock cannot be canceled while the shutter button is pressed halfway.
Page 96 Macro mode shooting — Taking close-up pictures Allows you to shoot close to the subject (no closer than 0.2 m (0.6 ft)) so that you can fill the entire frame with your subject while the zoom lever is pressed to the maximum W position. If the center of the frame (within the AF target mark) is metered when you are close to the subject and you shoot with the optimal exposure, the picture will turn out well (Spot metering+Macro mode).
Page 97: Function — Taking Black & White Or Sepia-Toned Pictures
FUNCTION — Taking black & white or sepia-toned pictures Lets you add special effect to your pictures during shooting. 4 effects are available. BLACK&WHITE : Takes pictures in black and white. SEPIA : Gives pictures a sepia tone. WHITE BOARD : Pictures are in black and white, with black letters on white backgrounds emphasized to make them easier to read.
Page 98: Panorama Shooting
Panorama shooting You can take advantage of panorama shooting with Olympus CAMEDIA- brand SmartMedia cards. (Non-Olympus cards do not support this feature.) Panorama shooting lets you connect images with overlapping edges into a single panoramic image, using the provided CAMEDIA Master software.
Page 99 Panorama mode A/S/M ● During panorama shooting, the flash is disabled. ● The Panorama mode is only available with the OLYMPUS CAMEDIA-brand SmartMedia cards. ● The camera itself cannot edit panorama pictures. To connect each picture, the CAMEDIA Master software is necessary.
Page 100: Recording Sound With Still Pictures
Recording sound with still pictures Sound can be recorded when taking still pictures. Recording starts about 0.5 seconds after the shutter is released. Total possible recording time per shot is approximately 4 seconds. When this function is on, sound is recorded every time you take a picture.
Page 101: Recording Sound With Movies
Recording sound with movies Sound can be recorded while shooting a movie. When zoom during shooting is not available. In the top menu, select MODE MENU T CAMERA T Shoot. Mode dial & (for movie) Mode dial A/S/M ● Sound cannot be played back on the camera itself. For playback, connect the camera to a TV with the provided A/V cable (P.
Page 102: Adjusting Image Quality And Exposure
Chapter Adjusting image quality and exposure...
Page 103: Record Mode
Record Mode Selecting Record Modes Choose the best record mode for your purposes (printing, editing on a computer, web-site editing, etc.). To see how large SmartMedia memory capacity is under various conditions (such as different resolutions, compressions, or file formats), refer to the table on the following page. The numbers in the table are approximate.
Page 104: Still Picture Record Modes
Record Mode (Cont.) Ññ Press to select the resolution (refer to the table below). ● When ENLARGE SIZE is chosen, press ● When SQ1 or SQ2 is chosen, HIGH or NORMAL can be selected in addition to the resolution. Still Picture Record Modes Record Resolution mode...
Page 105 Record Mode (Cont.) Press to save the setting. ● The screen returns to the record mode setting screen. ● The record mode you set is displayed on the control panel. Factory default setting for record modes P, A/S/M, : HQ ●...
Page 106: Enlarge Size
Record Mode (Cont.) ● SmartMedia memory capacity listed in the table is approximate. ● The number of storable images differs depending on the Record mode, the card’s memory size, the Preset print or the Sound recording. ● Areas using PAL (P.196) T If movie pictures are shot with the video cable connected, their maximum recording time may be different from the table on page 104.
Page 107: Iso Sensitivity
ISO Sensitivity The higher the ISO value, the greater the camera’s light sensitivity and the better its ability to shoot in low-light conditions. However, higher values also produce more “noise” in the resulting images. In the top menu, select MODE MENU T CAMERA T ISO. There are 4 choices of ISO: AUTO, 100, 200, or 400.
Page 108: Exposure Compensation
Exposure Compensation This function allows you to make fine changes to the present exposure setting. In some situations, you may get better results when the exposure that the camera sets is compensated (adjusted) manually. You can adjust between +/–2.0 in 1/3 steps. Adjusts towards –...
Page 109: White Balance
White Balance Color reproduction differs depending on the lighting conditions. For instance, when daylight, the setting sun, or indoor lighting are reflected on white paper, the shade of white produced will be slightly different for each. By setting the WB (white balance), you can achieve more natural-looking color. In the top menu, select MODE MENU T PICTURE T WB, then select the best WB (AUTO, PRESET, In the...
Page 110 White Balance (Cont.) Point the camera at a sheet of white paper. ● Position the paper so that it fills the screen entirely. Be sure there is no shadow or background showing around the paper. Press to store the new white balance setting.
Page 111: White Balance Adjustment
White Balance (Cont.) White Balance Adjustment This function allows you to make fine changes to the white balance. In the top menu, select MODE MENU T PICTURE T The white balance adjustment indicator appears on the screen. The color becomes bluer each time you press Ñ...
Page 112: Sharpness
Sharpness This function adjusts the sharpness of images. In the top menu, select MODE MENU T PICTURE T SHARPNESS. Sharpness can be adjusted between +5 and –5 using The outlines of images are more emphasized, and the images themselves look more vivid, making this ideal for printing.
Page 113: Contrast
Contrast This function adjusts the contrast of images. For example, images with strong differences in light and shadow can become milder, while those with weaker differences can become more vivid. In the top menu, select MODE MENU T PICTURE T CONTRAST. Contrast can be adjusted between +5 and –5 using Light and shadow are defined more clearly and images look crisper.
Page 114: Noise Reduction
Noise Reduction This function reduces the noise that appears on images during long exposures. When shooting night scenes, shutter speeds become slower and noise tends to appear on images. When noise reduction is set to ON, the camera automatically reduces noise to produce clearer images. However, shooting time is approximately twice as long as usual.
Page 115: Playback
Chapter Playback This chapter explains how to play back still pictures or movies, plus how to use available functions when the mode dial is set to (playback).
Page 116: Playing Back Still Pictures
Playing Back Still Pictures Single-Frame Playback Plays back one picture. Set the mode dial to ● The monitor turns on and displays the last picture taken. Use the arrow pad to play back other pictures. ● The mark is attached to pictures from movies. T See “Playing Back Movies”...
Page 117: Slide-Show
Slide-Show This function displays pictures from the card one after another, as if you are watching a slide-show. Sound is also played back if it is attached to a picture. However, the camera must be connected to a TV in order to hear the sound. Movies are played back like still pictures, starting from the first frame.
Page 118: Playing Back Movies - Movie Play
Playing Back Movies — MOVIE PLAY This function lets you play back or edit movies. Set the mode dial to using the arrow pad. Press to display the top menu. Ñ Press . The card access lamp starts blinking and movie data in the card is sent to the camera (downloading).
Page 119: Movie Playback
Playing Back Movies — MOVIE PLAY (Cont.) MOVIE PLAYBACK Plays back movies. Follow steps 1-3 on page 118. Ññ Press to select MOVIE PLAYBACK on the MOVIE PLAY screen. Press to start playback. ● When the movie finishes playing, the display automatically returns to the first frame.
Page 120: Index
Playing Back Movies — MOVIE PLAY (Cont.) INDEX Movies can be displayed as indexes of still frames. Indexes can be saved on the card as still pictures. Indexes are not stored in the same record mode as movies (see below). Record mode when the movie is shot Follow steps 1-3 on page 118.
Page 121 Playing Back Movies — MOVIE PLAY (Cont.) Select the last frame of the index using the arrow pad (See step 3). Press ● INDEX screen appears. INDEX screen INDEX INDEX RESET CANCEL CANCEL Press Ññ to select items. Press to run your choice. ●...
Page 122: Edit
Playing Back Movies — MOVIE PLAY (Cont.) EDIT This function allows you to edit movies by erasing parts you do not want. Follow steps 1-3 on page 118. Ññ Press to select EDIT on the MOVIE PLAY screen. ● The first-frame selection screen appears. ●...
Page 123 Playing Back Movies — MOVIE PLAY (Cont.) Press ● EDIT screen appears. EDIT screen EDIT EDIT RESET CANCEL CANCEL Ññ Press to select items. Press to run your choice. ● EDIT is not available when the card is protected or when “ appears (indicating insufficient memory).
Page 124: Displaying Shooting Information
Displaying Shooting Information This function lets you select how much shooting information is on the monitor in the playback mode. When it is set to OFF, only a small amount of information is displayed. For details on each piece of information displayed, see pages 19 and 20.
Page 125: Close-Up Playback
Close-up Playback Pictures displayed on the monitor can be enlarged. Each time you turn the zoom lever towards T, pictures are enlarged by 1.5, 2, 2.5, 3, 3.5 or 4 times. With the arrow pad, select the picture you want to enlarge. ●...
Page 126: Index Display
Index Display This function lets you show many pictures at the same time on the monitor. It is useful for comparing your pictures and choosing the best ones. The number of pictures shown can be 4, 9, or 16 (see the next page). In the single-frame playback mode (P.
Page 127: Selecting The Number Of Pictures
Index Display (Cont.) ● How to view a full-size picture from the index T Select the picture with the arrow pad, then press the zoom lever toward T. Selecting the Number of Pictures This function lets you change the number of pictures in an index display. In the top menu, select MODE MENU T SETUP T Choose the number of pictures (4, 9 or 16) and press...
Page 128: Adding Sound
Adding Sound Sound can be added to still pictures after you take them. You can also change sound that has already been recorded. Recording sound takes approx. 4 seconds for each picture. Select a still picture to add sound to by using the arrow pad. ●...
Page 129: Protect
Protect Pressing the button in the accidentally. Display the picture you want to protect by using the arrow pad. Press . The picture is now protected. ● To cancel protection, press ● Protected pictures cannot be deleted with the erase) function, but they can be deleted with the function.
Page 130: Erasing Pictures
Erasing Pictures Recorded pictures can also be erased. This can be done either one frame at a time or to all the pictures in the card. ● Pictures in a card with a write-protect seal cannot be erased. ● Once erased, pictures cannot be brought back. Single-Frame Erase This function only erases the picture displayed on the monitor.
Page 131: All-Frame Erase
Erasing Pictures (Cont.) All-Frame Erase This function erases all still pictures and movies in the card, except protected ones (P. 129). In the top menu, select MODE MENU T CARD T CARD SETUP T ALL ERASE. Press ● The ALL ERASE screen is displayed. Ñ...
Page 132: Formatting Cards
Cards must be formatted. Formatting prepares cards to receive data. Olympus CAMEDIA-brand cards are highly recommended. If you are going to use non-OLYMPUS cards or cards formatted by other devices such as a computer, you must format them with the camera before use. Cards can be formatted in all mode dial positions.
Page 133: Playback On A Tv
Playback on a TV With the provided AV cable, recorded images and sound can be played back on a TV. Make sure that the TV and camera power are off . Connect the camera to the TV using the AV cable. Connect to the TV's video input (yellow) and audio input (white) terminals.
Page 134: Picture Rotation
Playback on a TV (Cont.) Picture Rotation There may be times when you want to rotate a picture. For example, pictures taken with the camera held vertically are also oriented vertically (i.e. longer vertically than horizontally). With picture rotation, you can turn them horizontally, 90 degrees clockwise, or counter-clockwise.
Page 135: Useful Functions
Chapter Useful Functions This chapter explains various useful camera functions. Also see “Using the Menu” in Chapter 3.
Page 136: Custom Button
Custom Button Menu items listed in the table below can be set to the custom button on the camera. This makes it easy to jump to frequently-used functions by pressing only one button. The factory default setting is “AE LOCK”. Available Menu Items Items AE LOCK (P.
Page 137: Setting The Custom Button
Custom Button (Cont.) Setting the Custom Button In the top menu, select MODE MENU T SETUP T CUSTOM BUTTON. Press í ● The CUSTOM BUTTON screen appears. Select the function you want by using Ññ , then press setting. Using the Custom Button Press (custom button).
Page 138 Custom Button (Cont.) Mode Dial & Custom Button Mode dial Custom button A/S/M ● The custom button cannot be set separately for each shooting mode. ● Using AE LOCK after setting a different function to the custom button. T AE lock cannot be used when a different function is set to the custom button.
Page 139: Shortcut
Shortcut Functions on the top menu other than MODE MENU can be replaced with those listed in the table below. This is useful when you want to quickly go to frequently-used functions. Available Menu Items Items Drive mode (P. 88) ISO sensitivity (P.
Page 140: Setting The Shortcut Menu
Shortcut (Cont.) Setting the Shortcut Menu In the top menu, select MODE MENU T SETUP T SHORT CUT. Press ● The SHORT CUT screen appears. Select A, then press menu functions on page 139. ● A, B, and C on the monitor are the same as top, left, and bottom on the top menu.
Page 141: Using The Shortcut Menu
Shortcut (Cont.) Using the Shortcut Menu Press to display the top menu. ● The shortcut menu you set before is shown on the top menu. Press the arrow pad according to the arrow (˙ß¥) shown next to each item. ● The monitor jumps directly to the setting screen of that item. Ex: When DIGITAL ZOOM is set to the A shortcut.
Page 142: Self-Timer Shooting
Self-Timer Shooting This function is useful for taking pictures that the shooter wants to be in too. This can also be done with remote-control shooting. Use a tripod to stabilize the camera. In the top menu, select MODE MENU T CAMERA T DRIVE T press (in the select MODE MENU T CAMERA T...
Page 143: All Reset
All Reset This function lets you choose whether or not the camera saves its current settings. There are three options: The settings just before the power is turned off are saved. The factory default settings come back when the power is turned off. CUSTOM Your favorite settings are saved as “Custom Settings”.
Page 144 All Reset (Cont.) Ex: When setting the aperture on the CUSTOM screen. CUSTOM screen CUSTOM CUSTOM SHUTTER ZOOM Press The monitor then returns to the previous screen. í Press to go to the aperture setting screen. SHUTTER to save the setting. Increases the value Decreases the value CUSTOM...
Page 145 All Reset (Cont.) Available Items and Factory Default Settings Factory default Setting Aperture (P. 61) Shutter speed (P. 62) Exposure compensation (P. 108) LCD *1 Zoom *2 Flash mode (P. 84) Spot/Macro (P. 91) Drive (P. 88) Auto/manual focus (P. 70) ISO sensitivity (P.
Page 146: Beep
Beep You can set the volume of the beep used for button operations or warnings to OFF, LOW or HIGH. The factory default setting is LOW, but you can turn the beep completely off if you don't want it. In the top menu, select MODE MENU T SETUP T ●...
Page 147: File Name
File Name The camera automatically creates file names and folder names for images to be stored in. Files can be numbered from 0001 to 9999 and folders can be numbered from 100 to 999. Examples are shown below. ● Month: Jan. - Sep. = 1 - 9, Oct. = A, Nov. = B, Dec. = C There are two choices here: RESET or AUTO.
Page 148: Pixel Mapping
File Name (Cont.) ● When the File No. reaches 9999... The file number returns to 0001, and the folder number changes, for example, from No. 100 to No. 101. ● When the both Folder/File No. reach each maximum number (999/9999)... The number of storable pictures becomes 0, even if the card is not full yet.
Page 149: Measurement Units: M/Ft (Meters/Feet)
Pixel Mapping (Cont.) Press ● A progress bar appears during Pixel Mapping. ● When Pixel Mapping is finished, the screen returns to normal. ● If the power is turned off during Pixel Mapping, start again from Step 1. Measurement Units: m/ft (meters/feet) Measurement units can be selected from either meters or feet in the manual focus mode.
Page 150: Print Setting
Chapter Print setting Print reserve prepares pictures you have taken with the camera for printing at a photo lab or on your printer.
Page 151: How To Print Pictures
DPOF- compatible printing service labs or a personal DPOF-compatible printer. Printing on an Olympus CAMEDIA P-400, P-330N(E) or P-200 digital printer If you insert a card with Print Reserve data into the printer, printing is possible without using a computer.
Page 152 (index-display mode), it is possible to confirm the print reserve status. ● This camera cannot be directly connected to printers such as the Olympus P-300 digital printer. ● Not all functions may be available on all printers or at all photo labs.
Page 153: All-Frame Print Reserve
All-frame Print Reserve Set the mode dial to ● Pictures with cannot be printed out. Press the button to display the PRINT ORDER screen. PRINT ORDER SETTING PRINT ORDER SETTING PRINT ORDERED PRINT ORDERED RESET KEEP KEEP EXIT EXIT SELECT SELECT If Print Reserve data is already stored on the card, the PRINT...
Page 154: Single-Frame Print Reserve
Single-frame print reserve Display a still picture you want to print. ● Pictures with cannot be printed out. Press the button to display the PRINT ORDER screen. PRINT ORDER SETTING PRINT ORDER SETTING PRINT ORDERED PRINT ORDERED RESET KEEP KEEP EXIT EXIT SELECT...
Page 155 Single-frame print reserve (Cont.) Press ● The screen appears. Select DATE SELECT SELECT To “Trimming setting” (P. 156). To save the setting, press ● To perform Print Reserve for more pictures, repeat steps 3 – 5. Press the button twice. ●...
Page 156: Trimming Setting
Trimming setting It is possible to enlarge a part of a recorded picture and to print out the enlarged section only. Do steps 1 – 4 of “ S i n g l e - f r a m e print reserve”.
Page 157 Trimming setting (Cont.) Press to save the top left corner point. The screen changes to the one for setting the bottom right corner point. The methods for moving the vertical and horizontal lines are the same as described in step 2. ●...
Page 158 Trimming setting (Cont.) To save the setting, press Press the button twice. ● The screen exits from the Print Reserve mode to return to the playback mode. ● The size of the printed picture varies depending on the printer setting. If the trimmed picture size is small, printing magnification increases accordingly, resulting in a printed picture with lower resolution.
Page 159: Resetting Print Reserve
Resetting Print Reserve Resetting Print Reserve Allows you to reset all Print Reserve settings for pictures stored on a card. Display a still picture. Press the button to display the PRINT ORDER SETTING screen. ● If Print Reserve data is NOT stored on the card, the PRINT ORDER SETTING screen does not appear.
Page 160: Transferring Pictures To A Computer
Chapter Transferring pictures to a computer Pictures stored on the card can also be viewed on a computer. This chapter shows you how to transfer pictures to a computer for viewing and image processing.
Page 161: Connecting Directly To A Computer By Cable
Connecting directly to a computer by cable How to connect to a computer by USB cable depends on the OS your computer is running. Consult the manufacturer of your computer for details of its operating environment. Identification of running OS (Windows 98/98SE, Windows 2000 Professional/Me, Mac OS 9.0 - 9.1) Windows 98/98SE Professional/Me...
Page 162: How To Connect
Connecting directly to a computer by cable (Cont.) ● When connecting the camera to a computer, make sure that the remaining battery power is sufficient. When connected (transmitting) to a computer, the camera does not enter the Sleep (power save) mode nor will the camera’s power turn off automatically.
Page 163 Connecting directly to a computer by cable (Cont.) Connect the end of the USB cable marked A to the USB connector on the personal computer. Connect the end of the USB cable marked B to the USB connector on the camera. Set the mode dial to ●...
Page 164: Installing A Usb Driver When Using Windows 98/98Se
Connecting directly to a computer by cable (Cont.) Installing a USB driver when using Windows 98/98SE Connect the camera to the computer and set the mode dial to “How to connect”). ● A window appears saying that the computer has recognized the camera as a “New Device (hardware)”.
Page 165 Connecting directly to a computer by cable (Cont.) In the “Browse for folder” window, click on the [+] mark at the left- hand side of the “CD-ROM drive” icon, then click on the [+] mark at the left-hand side of “USB folder”. The “Win98” folder appears at the bottom of the USB folder.
Page 166: Transferring Images To A Computer - Downloading
Transferring images to a computer — Downloading If the camera is connected correctly to a personal computer, the card is recognized as a drive (usually “Removable Disk”) on a personal computer. When using a Macintosh, the card is displayed as a new drive (Untitled) on the desktop.
Page 167 Transferring images to a computer — Downloading (Cont.) Double-click the DCIM folder. ● A window containing a folder named 100OLYMP opens. Double-click the 100OLYMP folder. ● A new window opens, displaying your image files. Copy (download) the image files to your computer using Explorer. ●...
Page 168 Transferring images to a computer — Downloading (Cont.) Macintosh Connect the camera to your computer (see “How to connect” on P. 162). ● An “Untitled” icon appears on the desktop. If this icon does not appear, the camera is not connected correctly. Go back to “How to connect” (P. 162) and connect again.
Page 169 Transferring images to a computer Transferring images to a computer — Downloading (Cont.) — Downloading (Cont.) Copy (download) the image files to your computer using Mac OS. ● When moving or copying a file, be sure to follow any instructions provided by your computer.
Page 170: Removing The Card
Transferring images to a computer — Downloading (Cont.) Removing the card To avoid computer malfunctions, always do the following when removing the card. If a malfunction occurs, disconnect the USB cable and re-connect it, and/or re-start your personal computer. Windows Make sure the camera’s access lamp is off.
Page 171 Transferring images to a computer — Downloading (Cont.) Macintosh Make sure the camera’s access lamp is off. Drag and drop the “Untitled” Drive icon onto the Trash on the desktop or select “Special” — “Eject” on the menu. Open the card cover on the camera and remove the card.
Page 172: Removing The Usb Cable
Transferring images to a computer — Downloading (Cont.) Removing the USB cable To remove the USB cable, do the following: Remember: First remove the card, following the steps on P. 170. Removing the USB cable is possible even when the card is in the camera, but make sure that the card access lamp is not blinking.
Page 173: Saving Directly From A Card
Saving directly from a card Card adapters enable you to save images on your personal computer without having to connect your camera directly to your computer. For the latest information on available adapters, consult our Customer Support Center. Computer operating environment Personal computer equipped with a 3.5"...
Page 174: Using Optional Accessories
Chapter Using optional accessories...
Page 175: Ac Adapter
AC adapter An optional Olympus CAMEDIA-brand AC adapter allows you to power your digital camera from a common AC wall outlet. Be sure to use the specified AC adapter. Use an AC adapter designed to operate on the AC voltage in the area the camera is being used.
Page 176: External Flash
External flash Using the FL-40 external flash Various types of flash shooting are possible with the FL-40 external flash, which can be used either by itself or together with the main flash. If the FL-40 is used, flash mode and exposure compensation will be detected automatically by the camera, allowing the main flash and external flash to function together.
Page 177 External flash (Cont.) To use the external flash only T Select , then press To use the external flash together with the main flash T Select IN+ , then press Turn on the external flash. ● The mode for the external flash is TTL-AUTO. ●...
Page 178: Using Commercially Available External Flashes
External flash (Cont.) Using commercially available external flashes External flashes (commercially available) can also be used with the exclusive FL-BK01 (optional) and FL-CB01 bracket cable (optional) when the camera’s mode dial is set to A/S/M. For details on compatible commercially available external flashes, refer to the next page.
Page 179: Compatible Commercially Available External Flashes
External flash (Cont.) Compatible commercially available external flashes When selecting an external flash, use products which meet the following basic conditions. (1) Some flashes available on the market operate with a high voltage synchro terminal. If one of these is used, it may not function normally. Contact the manufacturer of the flash you are using concerning the specifications of the flash's synchro terminal.
Page 180: Remote Control Shooting
Remote control shooting Shooting is possible using the remote control. This is useful when you want to take a picture with yourself in it. Mount the camera on a tripod or place it on a stable, flat surface. In the top menu, select MODE MENU T CAMERA T DRIVE T Movie record mode: In the top menu, select MODE MENU T CAMERA T...
Page 181 Remote control shooting (Cont.) Press the shutter button on the remote control. ● The camera’s self-timer/remote control lamp blinks for about 3 seconds before taking the picture. ● If the camera’s self-timer/remote control lamp does not blink after pressing the shutter button on the remote control. T The remote control may be too far from the camera.
Page 182: Miscellaneous
Chapter Miscellaneous This chapter includes helpful information about troubleshooting camera operations, error codes, etc.
Page 183: Troubleshooting
Troubleshooting POSSIBLE CAUSES The camera does not work. 1 The power is off. 2 The batteries are loaded incorrectly. 3 The batteries are exhausted. 4 The batteries are temporarily unable to function. 5 It is connected to a personal computer. 6 The camera is in the sleep mode.
Page 184 Troubleshooting (Cont.) POSSIBLE CAUSES No picture is taken when the shutter button is pressed. 5 The card access lamp blinks after shooting in mode. 6 There is a problem with the card. 7 The card is full. 8 The batteries ran out of power.
Page 185 Troubleshooting (Cont.) POSSIBLE CAUSES The flash does not fire. 1 The flash is set to the off mode. 2 The subject is lighted. 3 Sequential shooting is 4 You are recording movies. 5 Panorama shooting is performed. 6 FUNCTION is set to BLACK/WHITE BOARD.
Page 186 Troubleshooting (Cont.) POSSIBLE CAUSES Picture rotate, Picture protect, Single-frame erase, All-frame erase, Print reserve and Card formatting cannot be performed. 1 A write-protect adhesive seal is affixed to the card. When the camera is connected to a computer, an error message appears while data is being transferred to the computer.
Page 187 Troubleshooting (Cont.) POSSIBLE CAUSES The picture is out of focus. 1 The camera moved when the shutter button was pressed. 2 The AF target mark was not on the subject. 3 The lens is dirty. 4 The subject was too close.
Page 188 Troubleshooting (Cont.) POSSIBLE CAUSES The picture is too dark. 1 The flash was blocked by a finger. 2 The subject was out of the working range of the flash. 3 The flash mode was set to the Off mode. 4 The subject was too small and was backlit.
Page 189: User Maintenance
User maintenance After use Be sure to turn off the power and attach the lens cap to the lens. Cleaning the camera Turn off the camera. (P. 30) Remove the batteries (P. 25). When using the AC adapter, unplug the AC adapter from the camera and the AC outlet.
Page 190: Error Codes
Error codes If there is a problem with your camera, a blinking error code will appear. Monitor Control panel Empty screen Possible Corrective causes action The card is Insert the card not inserted, correctly. or it cannot be Insert a different recognized.
Page 191 Error codes (Cont.) Monitor Control panel CARD-COVER OPEN Possible Corrective causes action The card is Format the card. not formatted. There are no Insert a card pictures in the which contains card, so there images. is nothing to play back. There is no Replace the card empty space...
Page 192: Specifications
640 x 480 pixels (TIFF/SQ2) 3200 x 2400 pixels (SHQ/HQ) 2816 x 2112 pixels (SHQ/HQ) Olympus lens 7.1 mm to 21.3 mm, F1.8 to F2.6, 10 elements in 7 groups (equivalent to 35 mm to 105 mm lens on 35 mm camera), aspherical...
Page 193 Specifications (Cont.) Viewfinder Monitor Battery charging time for flash Autofocus Outer connector Automatic calendar system Operating environment Temperature Humidity Power supply Dimensions (W) X (H) X (D) Weight SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF THE MANUFACTURER. Optical real image viewfinder 1.8"...
Page 194: Glossary Of Terms
Glossary of terms A (Aperture Priority) Mode You set the aperture yourself and the camera automatically varies the shutter speed so that the picture is taken with the best exposure. AE (Automatic Exposure) The camera's built-in exposure meter automatically sets the exposure.
Page 195 Glossary of terms (Cont.) DPOF (Digital Print Order Format) This is for saving desired print settings on digital cameras. By entering which images to print and the number of copies of each, the user can automatically have the desired images printed by a printer or print lab that supports the DPOF format.
Page 196 Glossary of terms (Cont.) M (Manual) Mode The user sets both the aperture and shutter speed. P (Program) Mode Also called Program AE mode. The camera automatically sets the best shutter speed and aperture for the shot. PAL (Phase Alternating Line) In Europe, PAL television signals are normally used.
Page 197: Index
Index AC adapter ...175 AC outlet ...175 Adjusting the monitor brightness ...76 AE lock ...94 AE memory ...93, 95 AF sequential shooting...88 All-frame print reserve ...153 Aperture ...59, 61 Assigning a function to the button ...137 Assigning the mode to A/S/M ...61–63 Auto flash ...81 Auto focus ...65 Auto bracket ...89...
Page 198 Index (Cont.) CAMERA, FLASH ...49, 177 CAMERA, SLOW...49, 83 CAMERA, NOISE REDUCTION ...49, 114 CAMERA, MULTI METERING ...49, 92 CAMERA, DIGITAL ZOOM...50, 79 CAMERA, FULLTIME AF...50, 69 CAMERA, AF MODE...50, 68 CAMERA, (for still pictures) ...50, 100 CAMERA, (for movies)...50, 101 CAMERA, PANORAMA ...50, 98 CAMERA, FUNCTION ...50, 97 Menu, PICTURE ...51...
Page 199 Index (Cont.) 2nd-CURTAIN ...83 Self-timer ...142 Sequential shooting ...88–90 Shutter speed...62, 63 Single frame playback ...116 Sleep mode ...30 Slide-show ...117 Slow synchronization ...82, 83 SmartMedia ...28 SmartMedia Reader/Writer ...173 Specifications ...192, 193 Spot AF ...68 Spot metering...91 Taking a still picture ...72–76 Telephoto shooting ...79 TIFF (non-compression)...103 Top menu ...44...
Page 200 Tel. +49 180 5-67 10 83 Tel. +49 40-237 73 899 Our Hotline is available from 9 am to 6 pm (Monday to Friday) (E-Mail) di.support@olympus-europa.com © 2001 OLYMPUS OPTICAL CO., LTD. http://www.olympus.com distec@olympus.com for Germany for Austria, Belgium, Denmark, France,...

Olympus CAMEDIA C-4040 Zoom Reference Manual

Using the Menus

Shooting Basics

Adjusting Image Quality and Exposure

Playback

Transferring Pictures to a Computer

Using Optional Accessories

Miscellaneous

Quick Links

Related Manuals for Olympus CAMEDIA C-4040 Zoom

Summary of Contents for Olympus CAMEDIA C-4040 Zoom

Table of Contents