Philips S91 series Manual page 30

30
English
SmartClean system
Problem
The SmartClean
system does not
work when I press
the on/off button.
The shaver is not
entirely clean
after I clean it in
the SmartClean
system.
The shaver is
not fully charged
after I charge it in
the SmartClean
system.
Possible cause
The SmartClean
system is not
connected to the
wall socket.
You have not placed
the shaver in the
SmartClean system
properly, so there is no
electrical connection
between the
SmartClean system
and the shaver.
The cleaning
cartridge needs to
be replaced.
The cleaning cartridge
is empty. The
replacement symbol
flashes to indicate that
you have to replace
the cleaning cartridge.
You have used another
cleaning fluid than
the original Philips
cleaning cartridge.
The drain of the
cleaning cartridge is
blocked.
You have not placed
the shaver in the
SmartClean system
properly, so there
is no electrical
connection between
the SmartClean system
and the shaver.
Solution
Put the small plug in the
SmartClean system and put
the supply unit in the wall
socket.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.
Replace the cleaning
cartridge.
Place a new cleaning
cartridge in the SmartClean
system.
Only use the original Philips
cleaning cartridge.
Remove the cartridge from
the SmartClean system and
push the hairs down the
drain with a toothpick.
Press down the top cap
('click') to ensure a proper
connection between the
shaver and the SmartClean
system.