Olympus 1200 Instruction Manual page 61

Monitor indication
The battery/card
compartment cover is open.
CARD-COVER
OPEN
The battery is empty.
g
BATTERY EMPTY
The data in the card cannot
CA RD SE TU P
be read. Or, the card is not
formatted.
xD CARD CLEAN
FORMAT
SET
OK
There is an error in the
M E M O RY S ET UP [ I N ]
internal memory.
POWER OFF
MEMORY FORMAT
SET
OK
The camera is not connected
to the computer or printer
NO CONNECTION
correctly.
There is no paper in the
printer.
NO PAPER
The printer has run out of ink. Replace the ink cartridge in the printer.
NO INK
The paper is jammed.
JAMMED
The printer's paper tray has
been removed or the printer
SETTINGS
has been operated while
CHANGED
changing settings on the
camera.
There is a problem with the
printer and/or camera.
PRINT ERROR
r
Pictures recorded on other
CANNOT PRINT cameras may not be printed
on this camera.
Possible cause Corrective action
Close the battery/card compartment cover.
Charge the battery.
Select [xD CARD CLEAN], and press e.
• Remove the card and wipe the contact
area with a soft dry cloth.
• Select [FORMAT] [YES] and press
e. All data on the card is erased.
Select [MEMORY FORMAT]
press e. All data in the internal memory
is erased.
Disconnect the camera and connect it again
correctly.
Load some paper in the printer.
Remove the jammed paper.
Do not operate the printer while changing
settings on the camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
Use a computer to print.
[YES] and
61
EN