Olympus 1200 Instruction Manual page 23

[COMBINE IN CAMERA 1]
Take pictures automatically for a panoramic picture and combine the pictures for a single
panoramic picture using your camera. Only combined pictures are saved.
1st
EXIT OK
Connects pictures
Target mark
from left to right
• Take the first picture.
• When you slightly move the camera in the direction of the next picture, a target mark and a pointer
appear.
• The pointer moves as you pan the camera. Move the camera slowly and steadily until the pointer
overlaps the target mark, then stay still.
• The camera shoots the second picture automatically.
• After the current subject appears on the monitor, take the third picture in the same manner as the
second one.
• After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press e before shooting the third picture.
[COMBINE IN CAMERA 2]
Take pictures manually for a panoramic picture and combine the pictures for a single
panoramic picture using your camera. Only combined pictures are saved.
1st
EXIT OK
Connects pictures
from left to right
• Use 43 to specify at which edge you want to connect the pictures, and then take the first
picture.
• Compose your second shots so that the edge of the first picture overlaps the edge of the second
picture, then shoot.
• Take the third picture in the same manner as the second one.
• After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press e before shooting the third picture.
2nd
EXIT OK
Pointer
2nd
EXIT OK
3rd
EXIT OK
3rd
EXIT OK
EXIT OK
23
EN