IBM pSeries 690 User Manual page 58

0>8
Checking for SPCN code level...
Updating SPCN Microcode PLEASE WAIT...
System Power Control Network (SPCN) FLASH Update Successful:
Initializing for Power Subsys code updates...
Please wait...., spcn_rc = 21
Checking Power Subsystem code levels...
Updating BPC (a0e00e01)... Please wait .....
Completed... (a0e00e01)
Please wait...., spcn_rc = 21
Updating BPC (a0e00e01)... Please wait .....
Completed... (a0e00e01)
Please wait...., spcn_rc = 21
Updating BPR (a0e00e02)... Please wait .....
Completed... (a0e00e02)
Updating BPR (a0e00e02)... Please wait .....
Completed... (a0e00e02)
Updating BPR (a0e00e02)... Please wait .....
Completed... (a0e00e02)
Updating DCA-RHP (a0e00e09)... Please wait .....
Completed... (a0e00e09)
Please wait...., spcn_rc = 21
Updating DCA-RHP (a0e00e09)... Please wait .....
Completed... (a0e00e09)
Please wait...., spcn_rc = 21
Updating DCA-RHP (a0e00e09)... Please wait .....
Completed... (a0e00e09)
Please wait...., spcn_rc = 21
Updating DCA-RHP (a0e00e09)... Please wait .....
Completed... (a0e00e09)
Please wait...., spcn_rc = 21
Updating DCA-RHP (a0e00e09)... Please wait .....
Completed... (a0e00e09)
Please wait...., spcn_rc = 21
Checking Power Subsystem code levels...
Power Subsystem code update completed
(Press Return to Continue)
v LED Control Menu
This menu displays the state of the processor subsystem disturbance or system attention LED and the
fault/identify LED on the I/O subsystem(s). Use this menu to toggle the attention/fault LEDs between
identify (blinking) and off. Option 1 is available only when the system is in the error state (the CEC is
powered on and the service processor menus are available). Option 1 is not available when the system
is in standby.
42 Eserver pSeries 690 User's Guide