Olympus FE-4020 Instruction Manual page 31

When erasing pictures in a internal memory,
do not insert the card into the camera.
When erasing pictures from the card, insert
a card into the camera in advance.
To erase all images [ALL ERASE]
1 Use FG to select [ALL ERASE], and
press the H button.
2 Use FG to select [YES], and press the
H button.
To individually select and erase
images [SEL. IMAGE]
1 Use FG to select [SEL. IMAGE], and
press the H button.
2 Use HI to select the image to be
erased, and press the H button to add a
R mark to the image.
●
Press the W zoom button to display an index
view. Images can be quickly selected using
FGHI. Press the T button to return to the
single frame display.
SEL. IMAGE
R mark
OK
3 Repeat Step 2 to select the images to be
erased, and then press the m button
to erase the selected images.
4 Use FG to select [YES], and press the
H button.
●
The images with a R mark are erased.
Saving print settings to the image data
[PRINT ORDER]
q (Playback menu)
"Print Reservations (DPOF)" (p. 40)
Print reservation can be set only for still
images that are recorded to the card.
For information on using the menus, see "Using the Menu" (p. 4).
ERASE/CANCEL MENU
PRINT ORDER
Protecting images [0]
q (Playback menu)
Protected images cannot be erased by
[ERASE] (p. 18, 30), [SEL. IMAGE], or [ALL
ERASE] (p. 30), but all images are erased
by [MEMORY FORMAT]/[FORMAT] (p. 32).
1 Use HI to select an image.
2 Press the H button.
●
Press the H button again to cancel the
settings.
3 If necessary, repeat Steps 1 and 2
to protect other images, and press the
m button.
Rotating images [y]
q (Playback menu)
1 Use HI to select an image.
2 Press the H button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to
make settings for other images, and press
the m button.
The new picture orientations will be saved
even after the power is turned off.
Adding sound to still images [R]
q (Playback menu)
1 Use HI to select an image.
2 Aim the microphone toward the sound
source.
FE-4040
Microphone
3 Press the H button.
●
Recording starts.
0
y
R
FE-4020/X-940
EN 31