Olympus FE-4020 Instruction Manual page 28

Selecting the focusing area [AF MODE]
z
(Shooting menu)
Available shooting modes: P M N
Submenu 2
FACE/iESP
SPOT
AF TRACKING
For some subjects, the frame may not appear or
*1
may take some time to appear.
*2 If the frame blinks in red, the camera is unable to
focus. Try again to press the shutter button halfway.
To focus on a moving subject
continuously (AF Tracking)
1 Hold the camera to align the AF target
mark on the subject and press the
H button.
2 When the camera recognizes the subject,
the AF target mark automatically tracks
the subject movement to focus on it
continuously.
3 To cancel the tracking, press the
H button.
Depending on the subjects or the shooting
conditions, the camera may be unable to
lock the focus or fail to track the subject
movement.
When the camera fails to track the subject
movement, the AF target mark changes to
red.
28 EN
AF MODE
*1 Available in the FE-4020/X-940 only.
Application
The camera focuses automatically.
(If a face is detected, it is shown
by a white frame *1 ; when the
shutter button is pressed halfway
and the camera is able to focus,
the frame color is changed to
green if the camera is able to
*2
focus. If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
The camera focuses on the
subject located within the AF
target mark.
The camera tracks the subject
movement automatically to focus
on it continuously.
Shooting at higher magnifi cations than
optical zoom without reducing the
image quality [FINE ZOOM]
s
*1
z
(Shooting menu)
P ~
Available shooting modes: P M N
Submenu 2
OFF
ON
This function will not reduce the image
quality since it does not convert the data
with fewer pixels into the data with larger
pixels.
When set to [ON], [IMAGE SIZE] is limited
to [4] or lower.
When set to [ON], digital zoom is canceled
automatically.
[FINE ZOOM] is not available when
[% SUPER MACRO] (p. 23) is selected.
Stabilizing the blurred image caused
by the camera shake when shooting
[IMAGE STABILIZER] (Still images)
(FE-4040)/[IS MOVIE MODE] (Movies)
z
(Shooting menu)
A (Movie menu)
Available shooting modes: P M s P
Submenu 2
OFF
ON
The default settings are [ON] for [IMAGE
STABILIZER] (still images) and [OFF] for [IS
MOVIE MODE] (movies).
FINE ZOOM
Available in the FE-4020/X-940 only.
*1
Application
Optical zoom and digital zoom are
used to zoom in for shooting.
Optical zoom and image cropping
are combined to zoom in for
shooting (up to 26.8x).
IMAGE STABILIZER
IS MOVIE MODE
Application
Shoots without using the image
stabilizing function.
Shoots using the image stabilizing
function.
s
*1
P ~
~ A