Setting Incoming Service Type - JRC JUE-501 Instruction Manual

4.2.3 Setting incoming service type

In this section, setting the incoming service types for TEL ports and ISDN port is explained.
The service type set here is used for ring indication of receiving calls on the port. Select the incoming
service type for each port by following the terminal device (telephone or FAX) being connected to each
port.
Open [9 Admin] menu by the sequence of [4.2.1] screen.
[ Telephony menu] screen will open. Select [1 Telephony], and open [Telephony setting item
selection] screen. Select the port you want to set from [TEL1] ~ [TEL6] or [ISDN] and open [TEL
menu] (or [ISDN menu]) screen. Then, select [4In Type] and choose incoming service type from
[Voice], [Fax], [Audio], [Voice/Fax] and [Voice/Audio]. Press
[TEL menu] (or [ISDN menu] ) screen. The contents of each service type are explained below (same
with those of outgoing).
Voice
4kbps Voice service (for telephone).
Fax 64kbps 3.1kHz Audio service for Fax. (Internal call is unavailable.)
Audio
64kbps 3.1kHz Audio service for high quality phone. (Internal call is available.)
Voice/Fax Both of 4kbps Voice service and 64kbps 3.1kHz Audio service for Fax.
Voice/Audio
Both of 4kbps Voice service and 64kbps 3.1kHz Audio service for high quality phone.
APAC E143.5
14:03 UTC
READY
8 Alarmpack
9 Admin
2 Te l e p h o n y
3 P o r t
Enter the
Secret code.
1 Te l e p h o n y
2 P B X
2 TEL1
3 TEL2
1 Terminal
2 Telephony
I dle screen
Press
Top menu screen
Select [9 Admin] and press
Admin menu screen
Select [2 Telephony] and press
READY
Telephony menu screen
0 0 0 m 0 0 s
button.
READY
3 Out Type
4 In Type
Voice
F a x
Audio
Fig.4.2.2 Setting service type menu
4-13
Select [2 Telephony] menu, then
OK button and the screen returns to
MENU button, then TOP menu opens.
OK
Select [1Telephony] and press
Telephony setting item selection screen
Select the TEL port you want to set and press
button.
TEL menu screen
Select [4 In Type] and press
Service type setting screen
Select [Voice] / [Fax] / [Audio]
and press OK button.
4. Getting started
button.
OK
button.
OK
OK
OK button.