Rejecting Incoming/Outgoing Call (Call Barring); Flow Of Setting Call Barring - JRC JUE-501 Instruction Manual

5. How to use the telephone/FAX

5.1.10 Rejecting Incoming/Outgoing call (call barring)

To reject Incoming/Outgoing call, you need to setup call barring function. It can be set by Web
interface also (refer to [6.5.2.3 Set Telephone Supplementary Service (p6-40)]).
APAC E143.5
14:03 UTC
8 Alarmpack
9 Admin
2 Telephony
Enter the
3 Port
Secret code.
1 Terminal
2 Telephony
CLR
Press
button repeatedly
to return to Idle
screen.
Idle screen
Press
Top menu screen
READY
READY
2 PBX
3 Suppl.
READY
3 Waiting
4 Barring
1 Voice
2 Audio
1 AllOutCall
2 OutExHC
3 AllIncall
4 InExHC
Enable
Disable
Fig.5.1.10 Flow of setting Call Barring
5-18
MENU
button.
Select [9 Admin] and press
Admin menu screen
Select [2 Telephony] and press
Telephony menu screen
Select [3 Suppl.] and press
Suppl. menu screen
Select [4 Barring] and press
Barring menu screen
Select service you want and press
Barring service menu screen
Select menu you want and press
MENU Meaning
AllOutCall Setting for All Outgoing Call.
Setting for Outgoing call Except
OutExHC
for Home Country.
AllInCall Setting for All Incoming Call.
Setting for Incoming call Except
InExHC
for Home Country.
Barring setting screen
Select [Enable/Disable] and press
button. ("Enable" denies the calls.)
Return to idle screen by pressing
button several times or pressing
button once.
OK button.
OK button.
OK button.
OK button.
OK button.
OK
button.
OK
CLR