Error Codes - Olympus E-PL2 Instruction Manual

Error codes

Monitor
indication
The card is not inserted, or it
cannot be recognized.
NO CARD
There is a problem with the
card.
CARD ERROR
Writing to the card is prohibited.
WRITE PROTECT
•
CARD FULL
•
CARD SETUP
Clean the contact area of
Card cannot be read. Card may
the card with a dry cloth.
CLEAN CARD
not have been formatted.
FORMAT
SET
There are no pictures on the
card.
NO PICTURE
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
PICTURE ERROR
playback on this camera.
Pictures taken with another
camera cannot be edited on this
THE IMAGE
camera.
CANNOT BE
EDITED
Images can not be transferred
between devices that
are currently receiving or
PICTURE
transmitting data.
ERROR
Possible cause
The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
There is no space in the card
and print reservation or new
images cannot be recorded.
Corrective action
Insert a card or insert a different
card.
Insert the card again. If the
problem persists, format the
card. If the card cannot be
formatted, it cannot be used.
The card write-protect switch is
set to the "LOCK" side. Release
the switch. (P. 96)
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
Select [CLEAN CARD], press
•
the Q button and turn off the
camera. Remove the card and
wipe dry the metallic surface
with a soft, dry cloth.
Select [FORMAT] [YES], and
•
then press the Q button to
format the card. Formatting
the card erases all data on
the card.
The card contains no pictures.
Record pictures and play back.
Use image processing software
to view the picture on a PC.
If that cannot be done, the image
fi le is damaged.
Use image processing software
to edit the picture.
Increase the amount of memory
available on the card, for
example by deleting unwanted
images, or choose a smaller size
for the images being transmitted.
11
EN 93