Image Overlay; Audio Recording - Olympus E-PL2 Instruction Manual

Image overlay

Up to 3 frames of RAW images taken with the camera can be overlaid and saved
as a separate image. The image is saved with the record mode set at the time the
image is saved. (If [RAW] is selected, the copy will be saved in [YN+RAW] format.)
1
With a RAW image displayed during playback, press
select [IMAGE OVERLAY].
2
Select the number of images in the overlay and press Q .
3
Use FGHI to select the RAW images
that will be used in the overlay and press
Q to select.
• When you have selected the number of images
specifi ed in Step 2, the overlay will be displayed.
4
Adjust gain.
• Use HI to select an image and use FG to adjust
gain.
• Gain can be adjusted in the range 0.1 – 2.0. Check
the results in the monitor.
5
Press Q. A confi rmation dialog will be
displayed; select [YES] and press Q.
%
Tips
• To overlay 4 or more frames, save the overlay image as a RAW fi le and use [IMAGE
OVERLAY] repeatedly.

Audio recording

Add an audio recording (up to 30 sec. long) to the current photograph.
1
Display the image to which you want to
add an audio recording and press Q.
• Audio recording is not available with protected images.
• Audio recording is also available in the playback menu.
2
Select [R] and press Q .
• To exit without adding a recording, select [NO].
3
Select [R START] and press Q to begin
recording.
To stop recording part-way through, press the Q
•
button.
4
Press Q to end recording.
• Images with audio recordings are indicated by a H icon.
• To delete a recording, select [ERASE] in Step 2.
Q
and
IMAGE OVERLAY
RAW RAW RAW
RAW
RAW RAW RAW
BACK SET
IMAGE OVERLAY
x 0.3 x 0.3 x 0.1
BACK SET
JPEG
JPEG EDIT
R
ROTATE
m
<
BACK SET
R
NO
R START
ERASE
BACK SET
5
EN 65