Olympus E-PL2 Instruction Manual page 94

Monitor
indication
m
Internal camera
temperature is
too high.
Please wait for
cooling before
camera use.
BATTERY
EMPTY
NO
CONNECTION
NO PAPER
NO INK
JAMMED
SETTINGS
CHANGED
11
PRINT ERROR
CANNOT PRINT
The lens is
locked. Please
extend the lens.
Please check the
status of a lens.
94 EN
Possible cause
The internal temperature of
the camera has risen due to
sequential shooting.
The battery is drained.
The camera is not connected to
the computer or printer correctly.
There is no paper in the printer. Load some paper in the printer.
The printer has run out of ink.
The paper is jammed.
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
There is a problem with the
printer and/or camera.
Pictures recorded on other
cameras may not be printed on
this camera.
The lens of the retractable lens
stays retracted.
An abnormality has occurred
between the camera and the
lens.
Corrective action
Turn off the camera and wait for
the internal temperature to cool.
Wait a moment for the camera
to turn off automatically. Allow
the internal temperature of the
camera to cool before resuming
operations.
Charge the battery.
Disconnect the camera and
connect it again correctly.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not manipulate the printer
while making settings on the
camera.
Turn off camera and printer.
Check the printer and remedy
any problems before turning the
power on again.
Use a personal computer to
print.
Extend the lens. (P. 12)
Turn off the camera, check the
connection with the lens, and
turn the power on again.