Desk Or Shelf Mount - Cisco Meraki MR18 Installation Manual

Then adjust the MR18 to guide the MR18's bottom slot into the cradle's bottom tab until it clicks into place. Once in
place, the MR18 should be secured to the cradle by using one of the included screws in the cradle's bottom tab.
To release the MR18 from the mount cradle, first remove the security screw that secures the MR18 to the cradle's
bottom tab. While holding the MR18 with one hand, press the cradle's bottom tab upwards, releasing the MR18 from the
bottom of the cradle. Then remove the MR18 from the cradle's top tab.

Desk or Shelf Mount

The MR18 can be placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is not necessary
for a desk or shelf installation.
14