Olympus DS-7000 Instructions Manual page 5

& POWER ( ON / OFF ) switch
* EAR (Earphone) jack
( MIC (Microphone) jack
) USB connector
- Docking station connector
Display status indicators (LCD panel)
Display in the recording mode
1
9
2
3
4
5
6
7
8
Display in the playback mode
0
!
@
#
$
%
Display in the recording mode
^
&
1 Current file name
2 Current folder
3 Current file number/ Total
number of recorded files in
the folder
4 Recording elapsed time
5 Remaining memory bar
indicator
6 Remaining recording time
7 Level meter indicator
8 Button guide display
9 Recorder status indicator
0 Current playback time
! Index mark indicator
@ Playback position bar
indicator
# Verbal comment indicator
$ File length
% Recording date and time
^ Slide switch guide
You can display the slide switch
guide by using " Slide switch
guide " of the customize functions
of ODMS software.
& File information area
Current file's information can be
displayed by using the " Display "
function in the ODMS software.
[ ]: SD card
[ ]: SD Card lock
[ ]: microSD card
[ ]: Microphone
sensitivity
[ ]: Recording mode
[ ]: Battery
[ ]: VCVA (Variable
Control Voice Actuator)
[ ]: Pending
[ ]: Encryption
[ ]: Priority
[ ]: File lock
[ ]: Author ID
[ ]: Work Type
[ ]: Option Item
Inserting the battery
This recorder uses a lithium ion
battery specified by Olympus (LI-42B).
Do not use any other type of battery.
1 Lightly press down on the battery
cover release button, then open
the battery cover, as shown in the
illustration below.
2 Insert the battery observing the
correct polarity as shown in the
illustration, then close the battery
cover.
• Insert the battery by sliding in
direction A while pushing down
in direction B .
Battery indicator:
The battery indicator on the display
will decrease as the battery loses
power.
• When this [ ] indicator appears
on the display, charge the battery
as soon as possible. When the
battery is too weak, [ s ] and
[ Battery Low ] will appear on the
display and the recorder will shut
down.
Notes:
• Turn off the recorder before
removing the battery. Removing
the battery while the recorder is still
in use may cause malfunctions, file
corruption or file loss.
• Remove the battery if you are not
going to use the recorder for an
extended period of time.
• After removing the battery, it may
become necessary to re-set the
time and date if you leave the
battery out of the recorder for more
than 15 minutes or if you remove
the battery right after loading it into
the recorder.
5