Parallel Cable - Oki POS 80 Plus III User Manual

Serial Cable Configurations
The following cable configurations are for different host
requirements.
9-pin Serial Cable
Use this cable for OKIPOS 80 Plus III printers connected to PCs
or PS/2s with 9-pin serial ports.
25-pin Serial Cable
Use this cable for OKIPOS 80 Plus III printers connected to PCs
or PS/2s with 25-pin serial ports.
User's Guide
80p3gb.p65 19

Parallel Cable

Cable Requirements
The OKIPOS 80 Plus III Printer requires a 25-pin male D-Shell
connector at the printer. To connect the printer to most PC's
use a 25-pin male to 25-pin male parallel interconnect cable.
Pin Assignments
Pin Signal Description
Pin 1 STROBE Clock Data to printer
Pin 2-9 D0 - D7 Data
Pin 10 ACK\ Printer Accepted Data
Pin 11 BUSY Printer is Busy
Pin 12 PE Paper Out/ Status
Pin 13 SLCT Printer Selected
Pin 14 AUTOFD Auto feed paper
Pin 15 ERR\ Printer Error
Pin 16 INIT\ Initialize the Printer
Pin 17 SLIN Select Printer
Pin 18-25 GND Ground
12/01/99, 11:43
Direction
Host to Printer
Host to Printer
Printer to Host
Printer to Host
Printer to Host
Printer to Host
Host to Printer
Printer to Host
Host to Printer
Host to Printer
19