Printer Connection; Parallel Cable; Usb Cable; Power Cable - Oki OKIPAGE 14ex Setup Manual

2. Adjust the rear paper support (2) to the size of
paper you are using by lifting up and sliding
forwards or backwards as necessary.
3. Adjust the paper guides (3).
4. Replace the tray in the printer. The paper level
indicator (4) provides a visual indication of how
much paper is left in the tray.

Printer connection

CAUTION:
Make sure the printer is disconnected from the power sup-
ply and the computer is turned off.
Parallel
cable
1. Connect the parallel cable into the parallel socket (1)
on the printer.
Setup Guide
2. Connect the other end of the parallel cable into the
parallel port on the computer.
Note:
The parallel cable should support bi-directional
communication and must be shielded.

USB cable

1. Connect the Type B (square) connector on the cable to
the USB interface connector (2) at the rear of the
printer.
2. Connect the Type A (small, flat) connector on the other
end of the cable to the USB port on the computer.

Power cable

1. Connect the power cable into the power socket (3) on
the printer, then into a grounded outlet.
2. Switch the printer on using the main power switch (4).
English
9