Loading And Removing Paper - Oki POS 80 Plus III User Manual

Loading and Removing Paper

This section describes how to load and remove paper. Change
the paper when the Status LED flashes. This indicates that the
paper is low. The printer will stop. You must change the paper
for the printer to resume operating.
Put in the New Paper Roll
Follow these instructions for loading paper.
If this is a new installation, a receipt roll is supplied with
the printer.
1. Open the paper cover by firmly pressing the cover latch
button.
If you are changing the paper, remove the used supply
roll.
12
80p3gb.p65 12
2. Place the paper roll so the paper unwinds from the bottom
(front).
3. Close the cover firmly.
12/01/99, 11:43
OKIPOS 80 Plus III