Parallel Input Cable; Serial Port Parameters - Oki X400 User Manual

Parallel Input Cable (Centronics 36 pin)

Serial Port Parameters

OKIPOS X400 printers are configured as Data Terminal Equipment
(DTE) equipment, and use Request-To-Send/Clear-To-Send (RTS/CTS)
handshaking or X-On/X-Off flow control (control characters are DC2
and DC4). The serial port supports the following parameters:
Speed
Parity
Data Bits
Stop Bit(s)
Default Parameters
Pin #
2~9
10
11
12
13
16
17
18
19~30
32
9600,19200 or 38400 bps
Odd, Even or None
7 or 8 bits
1 or 2
9600 bps, No parity, 8 data bits, 1
stop bit
Description
1 STROBE
Data bits 0-7
ACK
Busy
PE (Paper End)
Select, always high
Signal Ground
Chassis Ground
+5V DC
Ground
Fault
22