Table of Contents
Advertisement
Setting the Color Registration for
Windows 3.1x
Since each color is printed separately, you must set the color
registration to ensure that the colors line up properly. If the
colors are out of alignment, the printed page will appear
blurry and unclear.
To ensure optimum print quality, you should set the color
registration on a routine basis (once a month or so).
It is also recommended that you set the color registration
when you change toner or image drums, when you load paper
in the paper tray, or if you move the printer.
When you perform the color registration below, it will apply
only to the path you currently have selected.
To set the color registration:
1 Make sure the printer is off line (press ON LINE to place
the printer off line).
2 Press and hold Menu 2 until COLOR REG ADJUST
appears on the display.
|
32
OKICOLOR 8
3 Press ENTER.
PRINT PATTERN displays. The printer prints a color test
page with 9 sections, each with a series of lined boxes in
it.
Lined Boxes
Lined Box Numbers
Section #1
List Box
Advertisement
Table of Contents
