Table of Contents
Advertisement
Windows 3.1x
The driver for Windows 3.1x is supplied on CD–ROM and
floppy disk (use the CD–ROM if possible). Some countries
may have several floppy disks. In this case the appropriate
Windows driver disk will be clearly labelled.
Your floppy disk drive is assumed to be drive A and your
CD-ROM drive is assumed to be drive D. If this is not the
case, substitute the correct drive letter for your system.
1 Ensure that all documents are saved and all Windows
applications are closed.
2 In Windows Program Manager, choose
3 Insert the Windows 3.1x driver diskette or CD-ROM which
came with your printer into the appropriate drive.
4 If installing from floppy disk, type
dialogue box and click
If you are installing the driver from CD-ROM, type:
D:\SETUP.EXE
in the dialogue box and click
5 Follow the on-screen instructions to add the driver for your
printer to your system.
When installation is complete, the new printer will be
available from within your Windows applications.
Setup Guide
File–Run...
A:\SETUP.EXE
.
OK
.
OK
Windows 95/98 and Windows NT4
Your CD-ROM drive is assumed to be drive D. If this is
not the case, substitute the correct drive letter for your
system.
1 Ensure that all documents are saved and all Windows
applications are closed.
2 On the
Start
3 When prompted for the file, enter
D:\SETUP.EXE
and click
OK
4 Follow the on-screen instructions to add the driver for your
printer to your system.
When installation is complete, the new printer will be available
in the
from within your Windows applications.
menu, choose
Run...
.
15
Advertisement
Table of Contents
