4. Press and hold SHIFT, then press FF repeatedly until MANUAL
displays.
FEED
5. Press FF repeatedly until GAP CONTROL displays.
6. Press MODE repeatedly until the desired printhead gap setting
appears on the display.
7. Press and hold SHIFT, then press FF repeatedly until FRONT
displays.
FEED
8. Press FF repeatedly until GAP CONTROL displays.
9. Press MODE repeatedly until the desired printhead gap setting
appears on the display.
10. Press LOAD: this saves your setting and exits the menu mode.
FF.JPG
MODE.JPG
FF.JPG
MODE.JPG
LOAD.JPG
Microline 8480FB User's Guide
Setting the Printhead Gap • 68
SHIFT + FF.jpg
SHIFT + FF.jpg.JPG