3.3.7 Space Motor, Guide Roller Assy
(1)
Remove the printhead (see 3.3.1).
(2)
Remove the upper cover (see 3.3.4 (1) – (5)).
(3)
Remove the gear case Assy (see 3.3.5).
(4)
Remove the PC connector (see 3.3.6).
(5)
Remove screw
(6)
To install, follow the removal steps in the reverse order.
Notes on installation:
(1)
Do not touch the terminals of space motor
matters.
(2)
When installing the guide roller Assy
.
1
(3)
When installing the space motor
D against the frame.
(4)
After installation, check and adjust the gap between platen and printhead (see 4-1).
D
B
, then the guide roller Assy
2
, align the face C with carriage frame
1
4
C
1
1
3
A
from the space motor
3
. Also, take care to avoid dust or foreign
1
, push portions A and B against the space motor
3
2
3 – 11
.
1
and push portion
4
3