3.3.8 Space Rack
(1)
Remove the printhead (see 3.3.1).
(2)
Remove the upper cover (see 3.3.4 (1) – (5)).
(3)
Remove the gear case Assy (see 3.3.5).
(4)
Remove the space motor (see 3.3.7).
(5)
Remove the spring
(6)
Disengage the claw on left side of space rack
rack
in upper direction.
2
(7)
To install, follow the removal steps in the reverse order.
Note on installation:
(1)
After installation, check and adjust the gap between platen and printhead (see 4-1).
.
1
1
2
2
2
3 – 12
from the frame, and remove the space
2
1