Wiring Examples - STEINEL 300 Operating Instructions Manual

Reach setting/examples
2
3
4
16

Wiring examples

1. Fixture without neutral conductor
3. Connection via series switch
for manual and automatic operation
1) e.g. 1–4 x 100 W filament bulbs
2) consumer, lighting max. 2000 W (refer to Technical specifications)
3) IS 300 connection terminals
4) indoor switch
5) indoor series switch, manual, automatic
6) indoor double-throw switch, automatic, permanent light
Operation/Maintenance
prescribed for this purpose.
The motion sensor is suitable
Weather can affect operation
for automatic switching of
of the sensor. Strong gusts of
lights or alarms. The unit is
wind, snow, rain and hail can
not suitable for special burg-
cause switching errors, since
lary alarm systems, since it
the sudden temperature
lacks the sabotage protection
2. Fixture with neutral conductor
4. Connection to double-throw switch for
permanent light and automatic operation
Setting I: automatic operation
Setting II: manual operation for permanent
light
Important: the unit cannot be switched off,
only optional operation between settings I
and II.
changes cannot be distin-
guished from heat sources.
The detection lens can be
cleaned with a damp cloth
(without detergents) if dirty.
17