Installing Upgrades; Duplex Unit - Oki C5300n User Manual

INSTALLING UPGRADES

This section explains how to install optional equipment into your
printer. This includes:
>
>
>

DUPLEX UNIT

The duplex unit adds the function of two sided printing, using less
paper and making large documents easier to handle. It also enables
booklet printing, which uses even less paper and makes large
documents even easier to handle.
The duplex unit requires an additional 64MB memory upgrade.
The duplex unit slides straight into the rear of the printer and requires
no tools to install.
1.
Unpack the new unit and remove any transit material from it.
2. Switch the printer off. It is not necessary to disconnect the AC
power cable.
3. Ensure that the unit is the right way up, as shown, and push it
into the slot behind the rear panel. The panel will swing
inwards as you push the unit into it. Push the unit all the way
in until it stops and latches home.
duplex (two sided printing) unit;
additional RAM memory;
10GB hard disk drive.
INSTALLING UPGRADES > 183
NOTE