Test Printing The Overlay; Defining Overlays - Oki C5300n User Manual

9. Choose Projects→Save Project and enter a meaningful name
(e.g. "Letter Stationery") so that you can recognise it later if
you want to modify it.
10. Choose Projects→Send Project Files to Printer to download
the project to the printer.
If you have a hard disk in the printer, SDM will automatically
download files to it. If not, SDM will download files to flash
memory. If you have a hard disk but still prefer to download to
flash memory, double-click the file name in the Project window
and under Volume, type in %Flash0% and then click OK.
11. When the message "Command Issued" appears confirming
that the download is complete, click OK to clear the message.

TEST PRINTING THE OVERLAY

1. Click on the printer icon for the relevant printer and choose
Printers→Test Form.
2. In the Test PostScript Form window, to test each overlay select
it and click OK. There will be a short pause while the printer
processes the form, and then it will print.
3. When each overlay has been tested, click Exit.
4. Click the standard Windows Close (X) button, or choose
Projects→Exit to close Storage Device Manager.

DEFINING OVERLAYS

This is the final step before the new overlays are ready for use.
1. Open the Printers (called "Printers and Faxes" in Windows XP)
window via the Start menu or the Windows Control Panel.
2. Right-click on the Relevant PostScript printer icon and choose
Printing Preferences from the pop-up menu.
3. On the Overlay tab, click the New button.
OVERLAYS AND MACROS > 159